Mining - External Standards - IREDES - 7.18 LTPPaccPtsType

7.18 LTPPaccPtsType

7.18.1 Overview

The LTPPaccPtsType is used to document data for each pair of load point / dump point. It is based on the BaseObjectType and intended to be used as AddIn. Its formal definition can be found in Table 73.

7.18.2 ObjectType Definition

Table 73 – LTPPaccPtsType ObjectType Definition

Attribute	Value
BrowseName	LTPPaccPtsType
IsAbstract	False
References	Node Class	BrowseName	DataType	Type Definition	Other
Subtype of BaseObjectType as defined in OPC 10000-3
0:HasProperty	Variable	0:DefaultInstanceBrowseName	0:QualifiedName	0:PropertyType
0:HasProperty	Variable	LTPPLdrawPtN	String	0:BaseDataVariableType	M
0:HasComponent	Variable	LTPPLdrawPtID	String	0:BaseDataVariableType	O
0:HasProperty	Variable	LTPPLdumpPtN	String	0:PropertyType	M
0:HasComponent	Variable	LTPPLdumpPtID	String	0:BaseDataVariableType	O
0:HasComponent	Variable	LTPPLmass	Float	0:BaseDataVariableType	M
0:HasComponent	Variable	LTPPLcycl	UInt16	0:BaseDataVariableType	M
0:HasComponent	Variable	LTPPLdist	Float	0:BaseDataVariableType	M
0:HasComponent	Variable	LTPPLopObserv	String	0:BaseDataVariableType	O
0:HasAddIn	Object	LTPPTimeRep		LTPPTimeRepType	O

Conformance Units
IREDES LTPPaccPtsType

The component Variables of the LTPPaccPtsType have additional Attributes defined in Table 74.

Table 74 – LTPPaccPtsType Attribute Values for child Nodes

BrowsePath	Value Attribute	Description Attribute
0:DefaultInstanceBrowseName	LTPPaccPts	The default BrowseName for instances of this type.

7.18.3 ObjectType Description

The description can be found in Table 75.

Table 75 – LTPPaccPtsType Attribute Values for Child Nodes

BrowsePath	Description Attribute
LTPPLdrawPtN	Name of the draw (load point) accessed in the reported job.
LTPPLdrawPtID	Electronic (tag) ID of the draw (load point) in this combination (Name in 1.1.1.1).
LTPPLdumpPtN	Name of the dump point in this combination.
LTPPLdumpPtID	Electronic (tag) ID of the draw (load point) in this combination (Name in 1.1.1.1).
LTPPLmass	Mass transported between this point pair during reporting period in t. Min accuracy: 0.01 t.
LTPPLcycl	Number of cycles travelled between this point pair during reporting period.
LTPPLdist	Distance travelled between those two points during reporting period. Accumulated distance of al rounds travelled. Both routes are counted! Accuracy: 0.01 km.
LTPPLopObserv	Operator observations regarding the travel way, load or dump points during reporting period (e.g. loose rock, bad roadway,...). Preliminarily a string, later we can add preselect-lists for easier operator input!
LTPPTimeRep	Time reporting for access to the particular load / Dump point pair. Multiple elements may be required as work can be interrupted and restarted again at a later time during reporting period.