The PlaceInService2 Method extends the PlaceInService Method, by adding an optional Comment. For other functionality see the PlaceInService Method definition.

Signature

PlaceInService2(

[in] LocalizedTextComment

);

The parameters are defined in Table 68.

Table 68 – PlaceInService2 Method parameters

Argument

Description

Comment

A localized text to be applied to the Condition.

If the Comment argument is NULL (both locale and text are empty) it will be ignored and any existing comments will remain unchanged. If the comment is to be reset, an empty text with a locale shall be provided.

Method result codes in Table 69 (defined in Call Service)

Table 69 – PlaceInService2 result codes

Result Code

Description

Bad_MethodInvalid

The MethodId provided does not correspond to the ObjectId provided. See 10000-4 for the general description of this result code.

Bad_NodeIdInvalid

Used to indicate that the specified ObjectId is not valid or that the Method was called on the AlarmConditionType Node.

See 10000-4 for the general description of this result code.

Comments

The PlaceInService2 Method applies to an Alarm instance, even if it is not currently in the Active State.

Table 70 specifies the AddressSpace representation for the PlaceInService2 Method.

Table 70 – PlaceInService2 Method AddressSpace definition

Attribute

Value

BrowseName

PlaceInService2

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule

HasProperty

Variable

InputArguments

Argument[]

PropertyType

Mandatory

AlwaysGeneratesEvent

ObjectType

AuditConditionOutOfServiceEventType

Defined in 5.10.12

ConformanceUnits

A & C OutOfService2

If Auditing is supported, this Method shall generate an Event of AuditConditionOutOfServiceEventType for all invocations of the Method.