Table 51defines the parameters for the Service.

Table 51– QueryNext Service Parameters

Name

Type

Description

Request

requestHeader

Request Header

Common request parameters (see 7.33for RequestHeaderdefinition).

releaseContinuationPoint

Boolean

A Booleanparameter with the following values:

TRUEpassed continuationPointshall be reset to free resources for the continuation point in the Server.

FALSEpassed continuationPointshall be used to get the next set of QueryDataSets.

A Clientshall always use the continuation point returned by a QueryFirstor QueryNextresponse to free the resources for the continuation point in the Server. If the Clientdoes not want to get the next set of Queryinformation, QueryNextshall be called with this parameter set to TRUE.

If the parameter is set to TRUE all array parameters in the response shall contain empty arrays.

continuationPoint

ContinuationPoint

Serverdefined opaque value that represents the continuation point. The value of the continuation point was returned to the Clientin a previous QueryFirstor QueryNextresponse. This value is used to identify the previously processed QueryFirstor QueryNextrequest that is being continued, and the point in the result set from which the browse response is to continue.

The ContinuationPointtype is described in 7.9.

Response

responseHeader

Response Header

Common response parameters (see 7.34for ResponseHeaderdefinition).

queryDataSets []

QueryDataSet

The array of QueryDataSets.

The QueryDataSettype is defined in 7.28.

revisedContinuationPoint

ContinuationPoint

Server-defined opaque value that represents the continuation point. It is used only if the information to be returned is too large to be contained in a single response. When not used or when releaseContinuationPointis set, the value of this parameter is null or empty.

The ContinuationPointtype is described in 7.9.