Errata exists for this version of the document.
The End Aggregate defined in Table 37 retrieves the latest raw value within the interval, and returns that value and status with the timestamp at which that value occurs. If no values are in the interval then the StatusCode is Bad_NoData.
Table 37 – End Aggregate summary
|
End Aggregate Characteristics |
||
|
Type |
Calculated |
|
|
Data Type |
Same as Source |
|
|
Use Bounds |
None |
|
|
Timestamp |
Time of Raw Value |
|
|
|
||
|
Status Code Calculations |
||
|
Calculation Method |
Custom The raw value status is returned |
|
|
Partial |
Set Sometimes If an interval is not a complete interval |
|
|
Calculated |
Not Set |
|
|
Interpolated |
Not Set |
|
|
Raw |
Always |
|
|
Multi Value |
Not Set |
|
|
|
||
|
Status Code Common Special Cases |
||
|
Before Start of Data |
Bad_NoData |
|
|
After End of Data |
Bad_NoData |
|
|
No Start Bound |
Does not apply |
|
|
No End Bound |
Does not apply |
|
|
Bound Bad |
Does not apply |
|
|
Bound Uncertain |
Does not apply |
|