Various cooking processes are possible with a multi function pan; these include:

Gentle cooking;

Cooking;

Grilling;

Frying;

Regeneration;

Delta-T cooking;

Pressure cooking.

In addition, further manufacturer-specific types of cooking and actions are possible in a cooking process:

Zone grilling;

Zone cooking;

Keeping warm.

A multi function pan may consist of one or two pots. Each pot is independently operable. There are various pot sizes and depths.

Figure 16 shows an overview of the object types for the Multi Function Pan device class.

image020.jpg

Figure 16 — Overview of object types for Multi Function Pan

MultiFunctionPanParameterType provides information about the state of a pot, the set values and the current actual values.

The MultiFunctionPanParameterType is formally defined in Table 37.

Table 37 — MultiFunctionPanParameterType definition

Attribute

Value

BrowseName

MultiFunctionPanParameterType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule AccessLevel

Subtype of KitchenDeviceParameterType

HasComponent

Variable

MultiFunctionPanMode

MultiFunctionPanModeEnumeration

BaseDataVariableType

M, R

HasComponent

Variable

SpecialFunctionMode

SpecialFunctionModeEnumeration

BaseDataVariableType

O, R

HasComponent

Variable

CookingLevel

Int32

BaseDataVariableType

O, R

HasComponent

Variable

SetTemperature

Float

AnalogItemType

M, R

HasComponent

Variable

ActualTemperatureBottom

Float

AnalogItemType

M, R

HasComponent

Variable

ActualTemperatureCup

Float

AnalogItemType

M, R

HasComponent

Variable

SetProcessTimeProgram

Int32

AnalogItemType

M, R

HasComponent

Variable

TimeRemainingProgram

Int32

AnalogItemType

M, R

HasComponent

Variable

SetCoreTemperature

Float

AnalogItemType

M, R

HasComponent

Variable

ActualCoreTemperature

Float

AnalogItemType

M, R

HasComponent

Variable

ActualPressureAbsolute

Float

AnalogItemType

O, R

HasComponent

Variable

SetProcessTimeStep

Int32

AnalogItemType

O, R

HasComponent

Variable

TimeRemainingStep

Int32

AnalogItemType

O, R

HasComponent

Variable

SetZoneTemperature_<No.>

Float

AnalogItemType

OP, R

HasComponent

Variable

ActualZoneTemperature_<No.>

Float

AnalogItemType

OP, R

HasComponent

Variable

IsLidLocked

Boolean

BaseDataVariableType

O, R

HasComponent

Variable

IsWithPressure

Boolean

BaseDataVariableType

O, R

HasComponent

Variable

IsWithCleaning

Boolean

BaseDataVariableType

O, R

HasComponent

Variable

IsWithTilting

Boolean

BaseDataVariableType

O, R

HasComponent

Variable

IsWithLift

Boolean

BaseDataVariableType

O, R

HasComponent

Variable

IsLidOpen

Boolean

BaseDataVariableType

O, R

ActualPressureAbsolute and IsLidLocked are required for devices with pressure function.

This variable describes the state of the device, e.g. preheating, active, cleaning

The data type for the MultiFunctionPanModeEnumeration is defined in section 12.4.1.

This variable describes special device functions, e.g. pour in water, tilt pot, lift/lower lid.

The data type for the SpecialFunctionModeEnumeration is defined in section 12.4.2.

This variable describes the cook/grill/pressure stage with which the process should run. The cooking process takes place with different control values or pressure presets, depending on the stage.

This variable contains the set temperature to which heating up is to take place.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured bottom temperature in the pot.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured cup temperature in the pot.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the set process time of the entire cooking program in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the remaining process time of the entire cooking program in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the set core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the currently measured core temperature.

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes the current absolute pressure in the pot.

The EngineeringUnit property of the AnalogItemType has the value mbar. The value for the EURange property is device-specific.

This variable describes the set process time of the current cooking step in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

This variable describes the remaining process time of the current cooking step in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

The numbered variable SetZoneTemperatur_<No.> contains the set temperature of a zone in °C. This variable may be used several times (numbered consecutively), depending on the number of zones that exist.

The value applies only to the MultiFunctionPanMode ZoneGrilling

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

The numbered variable ActualZoneTemperatur_<No.> contains the current temperature of a zone in °C. This variable may be used several times (numbered consecutively), depending on the number of zones that exist.

The value applies only to the MultiFunctionPanMode ZoneGrilling

The EngineeringUnit property of the AnalogItemType has the value °C. The value for the EURange property is device-specific.

This variable describes whether the lid is locked. The value applies only to devices with a pressure cooking function.

This variable describes whether the device has the equipment for pressure cooking.

This variable describes whether the device is equipped with automatic cleaning.

This variable describes whether the device has an automatic tilting facility.

This variable describes whether the device has a lift.

This variable describes whether the lid is open.

MultiFunctionPanDeviceType describes a device from the Multi Function Pan device class.

The MultiFunctionPanDeviceType is formally defined in Table 38.

Table 38 — MultiFunctionPanDeviceType definition

Attribute

Value

BrowseName

MultiFunctionPanDeviceType

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

ModellingRule AccessLevel

Subtype of CommercialKitchenDeviceType

HasProperty

Variable

EnergySource

EnergySourceEnumeration 

PropertyType

M, R

HasComponent

Object

MultiFunctionPan_<No.>

 

MultiFunctionPanParameterType

MP, R

The EnergySource property returns the type of energy supply. The data type for the EnergySourceEnumeration is defined in 21.1.

The MultiFunctionPan object contains the parameters for a device of the type Multi Function Pan and may consist of one or two pots.

The data type is an enumeration of the current status of the device.

The enumeration values are defined in Table 39.

Table 39 — MultiFunctionPanModeEnumeration values

Value

Description

Off_0

off

On_1

switched on, but no cooking process is active

Preheat_2

Heating up

StandBy_3

Eco-mode, lowering of the temperature

PressureCooking_4

Pressure cooking

SoftCooking_5

Gentle cooking

Cooking_6

Cooking

Grilling_7

Grilling

Frying_8

Frying

Regenerate_9

Regeneration

DeltaTcooking_10

Delta-T cooking

ZoneGrilling_11

Zone grilling

ZoneCooking_12

Zone cooking

Cleaning_13

Cleaning

PresetStart_14

Start time preselection active

Error_15

Error state

This data type is an enumeration of various special functions.

The enumeration values are defined in Table 40.

Table 40 — SpecialFunctionModeEnumeration values

Value

Description

LidUpDown_0

Open/close lid

PanTilt_1

Tilt pot/tilt pot back

WaterSupply_2

Water supply

DrainOnOff_3

Open/close drain