Argument

Description

Identifier

AutoID Identifier according to the device configuration as returned as part of a ScanResult in a scan event or scan method. The ScanData DataType is defined in 9.4.2.

If the ScanData is used as returned in the ScanResult, the structure may contain information that must be ignored by the AutoID Device. An example is the ScanDataEpc where only the parameter UId is relevant for this Method.

If the Identifier is provided from a different source than the ScanResult, a ScanData with a ByteString can be used to pass a UId where the CodeType is set to ‘UId’.

CodeType

Defines the format of the ScanData in the Identifier as string. The String DataType CodeTypeDataType and the predefined format strings are defined in 9.1.3.

Region

Region of the memory area to be accessed. If there is no bank available this value is set to 0. This is the bank for UHF (ISO/IEC 18000-63) or the bank (ISO/IEC 18000-3 Mode 3) or data bank (ISO/IEC 18000-3 Mode 1) for HF.

Offset

Start address of the memory area [byte counting]

Data

Data to be written

Password

Password for write operation (if required)

Status

Returns the status of the write operation.

The AutoIdOperationStatusEnumeration DataType is defined in 9.2.1.

ResultCode

Description

Bad_MethodInvalid

The device does not support this function

Bad_InvalidState

This command is not available or not allowed e.g. due to special configuration