ExecutionCycleEnumeration describes the type of acquisition cycle performed on a stream, in progress or completed.
Table 88 – ExecutionCycleEnumeration states
|
Seq. number |
EnumString |
Description |
|
0 |
IDLE_0 |
No acquisition cycle in progress |
|
1 |
DIAGNOSTIC_1 |
Diagnostic cycle |
|
2 |
CLEANING_2 |
Cleaning cycle |
|
3 |
CALIBRATION_4 |
Calibration cycle |
|
4 |
VALIDATION_8 |
Validation cycle |
|
5 |
SAMPLING_16 |
Normal Sample acquisition cycle |
|
6 |
DIAGNOSTIC_WITH_GRAB_SAMPLE_32769 |
Diagnostic cycle with grab sample operation |
|
7 |
CLEANING_WITH_GRAB_SAMPLE_32770 |
Cleaning cycle with grab sample operation |
|
8 |
CALIBRATION_WITH_GRAB_SAMPLE_32772 |
Calibration cycle with grab sample operation |
|
9 |
VALIDATION_WITH_GRAB_SAMPLE_32776 |
Validation cycle with grab sample operation |
|
10 |
SAMPLING_WITH_GRAB_SAMPLE_32784 |
Normal Sample acquisition cycle with grab sample operation |
When an ExecutionCycle with sequence number 6 through 10 (GRAB_SAMPLE) is selected, the operator or a system can grab a sample and send it to a control lab for analysis.