Table 125 – RioQualifierEnumeration Items
|
Name |
Value |
Description |
|
BAD_NOT_SPECIFIC |
0 |
Proxy determines that a device does not communicate. |
|
BAD_NOT_CONNECTED |
8 |
Some communication error: the device is currently unavailable. |
|
BAD_NOT_CONNECTED_SIMULATION_ACTIVE |
9 |
Same as BAD_NOT_CONNECTED but with simulate flag set. |
|
BAD_PASSIVATED |
32 |
The channel is passivated. |
|
BAD_PASSIVATED_SIMULATION_ACTIVE |
33 |
Same as BAD_PASSIVATED but with simulate flag set. |
|
BAD_MAINTENANCE_ALARM |
36 |
No measurement available because of a failure. |
|
BAD_MAINTENANCE_ALARM_SIMULATION_ACTIVE |
37 |
Same as BAD_MAINTENANCE_ALARM but with simulate flag set. |
|
BAD_PROCESS |
40 |
No measurement available because of invalid process conditions. |
|
BAD_PROCESS_SIMULATION_ACTIVE |
41 |
Same as BAD_PROCESS but with simulate flag set. |
|
BAD_FUNCTION_CHECK |
60 |
Local override, value not usable. |
|
BAD_FUNCTION_CHECK_SIMULATION_ACTIVE |
61 |
Same as BAD_FUNCTION_CHECK but with simulate flag set. |
|
UNCERTAIN_SUBSTITUTE_SET |
72 |
The configured substitute value (see SubstituteValue) is used as Process Value. |
|
UNCERTAIN_SUBSTITUTE_SET_SIMULATION_ACTIVE |
73 |
Same as UNCERTAIN_SUBSTITUTE_SET but with simulate flag set. |
|
UNCERTAIN_INITIAL_VALUE |
76 |
Default value since no measured value is available. |
|
UNCERTAIN_INITIAL_VALUE_SIMULATION_ACTIVE |
77 |
Same as UNCERTAIN_INITIAL_VALUE but with simulate flag set. |
|
UNCERTAIN_MAINTENANCE_DEMANDED |
104 |
Value is potentially invalid. |
|
UNCERTAIN_MAINTENANCE_DEMANDED_SIMULATION_ACTIVE |
105 |
Same as UNCERTAIN_MAINTENANCE_DEMANDED but with simulate flag set. |
|
UNCERTAIN_NO_MAINTENANCE |
120 |
The process conditions are out of the specified operating range of the device. |
|
UNCERTAIN_NO_MAINTENANCE_SIMULATION_ACTIVE |
121 |
Same as UNCERTAIN_NO_MAINTENANCE but with simulate flag set. |
|
GOOD |
128 |
No error or special condition is associated with this value. |
|
GOOD_SIMULATION_ACTIVE |
129 |
Same as GOOD but with simulate flag set. |
|
UPDATE |
130 |
IM_Revision_Counter changed. |
|
GOOD_INITIATE_FAULT_STATE |
160 |
The value is from a block that wants its following output block (e.g. Actuator FB) to go to Fail Safe. |
|
GOOD_MAINTENANCE_REQUIRED |
164 |
Value is usable. Maintenance is recommended within a medium-term period. |
|
GOOD_MAINTENANCE_REQUIRED_SIMULATION_ACTIVE |
165 |
Same as GOOD_MAINTENANCE_REQUIRED but with simulate flag set. |
|
GOOD_MAINTENANCE_DEMANDED |
168 |
Value is usable. Maintenance is strongly recommended within a short-term period. |
|
GOOD_MAINTENANCE_DEMANDED_SIMULATION_ACTIVE |
169 |
Same as GOOD_MAINTENANCE_DEMANDED but with simulate flag set. |
|
GOOD_LOCAL_OVERRIDE |
156 |
The value is from a block that has been locked out. |
|
GOOD_LOCAL_OVERRIDE_SIMULATION_ACTIVE |
157 |
Same as GOOD_LOCAL_OVERRIDE_SIMULATED but with simulate flag set. |
|
GOOD_FUNCTION_CHECK |
188 |
Function check is being executed. |
|
GOOD_FUNCTION_CHECK_SIMULATION_ACTIVE |
189 |
Same as GOOD_FUNCTION_CHECK but with simulate flag set. |
|
UNSPECIFIED |
255 |
No information about the status is given. |
Its representation in the AddressSpace is defined in Table 126.
Table 126 – RioQualifierEnumeration Definition
|
Attribute |
Value |
|||||
|
BrowseName |
RioQualifierEnumeration |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Other |
|
|
Subtype of the Enumeration type defined in OPC 10000-5 |
||||||
|
0:HasProperty |
Variable |
0:EnumValues |
0:EnumValueType [] |
0:PropertyType |
|
|
|
Conformance Units |
||||||
|
PNRIO Channel Objects |
||||||