The LldpSystemCapabilitiesMap OptionSet is based on UInt32. It is used to represent the bitmap for the capabilities of a system as defined in IEEE 802.1AB-2016. All possible options for the LldpSystemCapabilitiesMap are formally defined in Table 48.
Table 48 – LldpSystemCapabilitiesMap OptionSet
|
Value |
Bit No. |
Description |
|
Other |
0 |
System has capabilities other than those listed below |
|
Repeater |
1 |
System has repeater capability |
|
Bridge |
2 |
System has bridge capability |
|
WlanAccessPoint |
3 |
System has WLAN access point capability |
|
Router |
4 |
System has router capability |
|
Telephone |
5 |
System has telephone capability |
|
DocsisCableDevice |
6 |
System has DOCSIS cable device capability (IETF RFC 4639) |
|
StationOnly |
7 |
System has only station capability |
|
CvlanComponent |
8 |
System has C-VLAN component functionality |
|
SvlanComponent |
9 |
System has S-VLAN component functionality |
|
TwoPortMacRelay |
10 |
System has Two-port MAC Relay (TPMR) functionality. |
All variables in the LldpSystemCapabilitiesMap OptionSet are per default set to False. The variable Other indicates that the system has capabilities, which are not specified in the OptionSet. All other variables shall only be set to True, if they are applicable for this device.
Its representation in the AddressSpace is defined in Table 49.
Table 49 – LldpSystemCapabilitiesMap OptionSet Definition
|
Attribute |
Value |
|||||||||
|
BrowseName |
LldpSystemCapabilitiesMap |
|||||||||
|
IsAbstract |
False |
|||||||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Other |
|||||
|
Subtype of 0:UInt32 defined in OPC 10000-5 |
||||||||||
|
0:HasProperty |
Variable |
OptionSetValues |
0:LocalizedText[] |
0:PropertyType |
|
|||||
|
Conformance Units |
||||||||||
|
BNM IEEE LLDP Info |
||||||||||