9 Health Status ToC Previous Next

9.2 Overall health status of an asset ToC Previous Next

The Variable 2:DeviceHealth defined in OPC 10000-100 is used to provide the overall health status of an asset. It uses an enumeration having the values NORMAL, FAILURE, CHECK_FUNCTION, OFF_SPEC and MAINTENANCE_REQUIRED (see OPC 10000-100 for details).

Note that this Variable should be used for all assets, independent of what type of asset it is, for example also for software components. For some types of assets, not all values of the enumeration can reasonably be applied.

OPC 10000-100 defines the interface 2:IDeviceHealthType containing optionally the Variable 2:DeviceHealth. In older versions of OPC 10000-100 the Variable was only defined on the 2:DeviceType.

In order to support older versions of OPC 10000-100, Objects representing an asset and providing health status information shall provide the 2:DeviceHealth Variable. This should be achieved by implementing the 2:IDeviceHealthType interface providing optionally the 2:DeviceHealth Variable. This can be done either directly on the instance (X:Asset1) or via the TypeDefinition (X:Asset2), as shown in Figure 8. However, it is also allowed to just provide the 2:DeviceHealth Variable as done by X:Asset3 by using the 2:DeviceType. Note that in the current version of OPC 10000-100 2:DeviceType does implement 2:IDeviceHealthType.

readme_files/image010.png Figure 8 – Examples of assets providing health status

The SourceTimestamp of the 2:DeviceHealth Variable provides the time when the asset entered that health status. In order to provide an accurate time, Servers should preserve the time, also when restarting the Server. As this might not always be possible, a Client shall be aware that the SourceTimestamp is not always the time when the asset switched the health status.

Previous Next