7 OPC UA ObjectTypes ToC Previous Next

7.18 SupervisionElectronicsType ObjectType Definition ToC Previous Next

The SupervisionElectronicsType provides Variables used for monitoring the Pump electronics. It is formally defined in Table 43. For the generation of events, the SupervisionElectronicsType has references to the four Namur NE 107 statuses defined in OPC 10000-100. The InputNode Property of the Alarm shall contain the NodeId of the Component.

Table 43 – SupervisionElectronicsType Definition

Attribute Value        
BrowseName SupervisionElectronicsType        
IsAbstract false        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node.          
0:HasComponent Variable ArmatureCircuit 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable CurrentInsideDevice 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable ElectricalFault 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable FieldCircuit 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable InstallationFault 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable InsulationResistance 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable PhaseFailure 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable ShortCircuit 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable ShortToEarth 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyCurrent 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyCurrentHigh 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyCurrentLow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyFrequency 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyFrequencyHigh 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyFrequencyLow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyVoltage 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyVoltageHigh 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable SupplyVoltageLow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable VoltageInsideDevice 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable WindingTemperature 0:Boolean 0:TwoStateDiscreteType O, RO
0:GeneratesEvent ObjectType 2:CheckFunctionAlarmType Defined in OPC 10000-100    
0:GeneratesEvent ObjectType 2:FailureAlarmType Defined in OPC 10000-100    
0:GeneratesEvent ObjectType 2:MaintenanceRequiredAlarmType Defined in OPC 10000-100    
0:GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100    

The InstanceDeclarations of the SupervisionElectronicsType have additional Attributes defined in Table 44. The Variables and the associated Descriptions are based on the standard VDMA 24223-1.

Table 44 – SupervisionElectronicsType Attribute values for child Nodes

BrowsePath Description Attribute
ArmatureCircuit This property indicates a failure in armature circuit.
CurrentInsideDevice This property indicates unacceptable current inside the device.
ElectricalFault This property indicates a generic electrical fault.
FieldCircuit This property indicates a failure in field circuit.
InstallationFault This property indicates an unacceptable electrical installation, e.g. mixed up phases.
InsulationResistance This property indicates an unacceptable low winding resistance.
PhaseFailure This property indicates a phase failure.
ShortCircuit This property indicates a short circuit.
ShortToEarth This property indicates a short to earth.
SupplyCurrent This property indicates a failure of supply current.
SupplyCurrentHigh This property indicates too high supply current.
SupplyCurrentLow This property indicates too low supply current.
SupplyFrequency This property indicates unacceptable supply frequency.
SupplyFrequencyHigh This property indicates too high supply frequency.
SupplyFrequencyLow This property indicates too low supply frequency.
SupplyVoltage This property indicates a failure of supply voltage.
SupplyVoltageHigh This property indicates too high supply voltage.
SupplyVoltageLow This property indicates too low supply voltage.
VoltageInsideDevice This property indicates unacceptable voltage inside the device.
WindingTemperature This property indicates an unacceptable winding temperature.

Previous Next