7 OPC UA ObjectTypes ToC Previous Next

7.16 SupervisionPumpOperationType ObjectType Definition ToC Previous Next

The SupervisionPumpOperationType provides Variables used for monitoring the Pump operation. It is formally defined in Table 39. For the generation of events, the SupervisionPumpOperationType has references to the four Namur NE 107 statuses defined in OPC 10000-100. The InputNode Property of the Alarm shall contain the NodeId of the Component.

Table 39 – SupervisionPumpOperationType Definition

Attribute Value        
BrowseName SupervisionPumpOperationType        
IsAbstract False        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of the 2:FunctionalGroupType defined in OPC 10000-100, i.e. inheriting the InstanceDeclarations of that Node.          
0:HasComponent Variable AccessoryLiquidFlow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable AccessoryLiquidHigh 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable AccessoryLiquidLow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable AccessoryLiquidOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable AccessoryLiquidPressure 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable AmbientTemperature 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable CaseOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable ControllerOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable ConverterOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable CoolantFlow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable CoolantHigh 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable CoolantLow 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable CoolantOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable Deceleration 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable DirtyImpeller 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable DriveOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable GeneratorOperation 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable Leakage 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable Lubricant 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable MaximumNumberStarts 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable MaximumOperationTime 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable MaximumStartsAtTime 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable MotorHumidity 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable MotorOverheat 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable OperationFault 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable OverLoad 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable OverSpeed 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable PartialLoad 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable Synchronisation 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable TemperatureFault 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable TimeOut 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable TMSFailure 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable TorqueLimit 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable TurbineOperation 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable UnderSpeed 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable VelocityLimit 0:Boolean 0:TwoStateDiscreteType O, RO
0:HasComponent Variable WearReserveExhausted 0:Boolean 0:TwoStateDiscreteType O, RO
0:GeneratesEvent ObjectType 2:CheckFunctionAlarmType Defined in OPC 10000-100    
0:GeneratesEvent ObjectType 2:FailureAlarmType Defined in OPC 10000-100    
0:GeneratesEvent ObjectType 2:MaintenanceRequiredAlarmType Defined in OPC 10000-100    
0:GeneratesEvent ObjectType 2:OffSpecAlarmType Defined in OPC 10000-100    

The InstanceDeclarations of the SupervisionPumpOperationType have additional Attributes defined in Table 40. The Variables and the associated Descriptions are based on the standard VDMA 24223-1.

Table 40 – SupervisionPumpOperationType Attribute values for child Nodes

BrowsePath Description Attribute
AccessoryLiquidFlow This attribute indicates a problem with the accessory liquid flow, e.g. the buffer fluid flow or operating fluid flow.
AccessoryLiquidHigh This attribute indicates a high limited accessory liquid, e.g. the buffer fluid or operating fluid.
AccessoryLiquidLow This attribute indicates a low limited accessory liquid, e.g. the buffer fluid or operating fluid.
AccessoryLiquidOverheat This attribute indicates an overheating of the accessory liquid, e.g. the buffer fluid or operating fluid.
AccessoryLiquidPressure This attribute indicates an abnormal pressure of the accessory liquid, e.g. the buffer fluid pressure or operating fluid pressure.
AmbientTemperature This attribute indicates an abnormal ambient temperature.
CaseOverheat This attribute indicates an overheating of the case.
ControllerOverheat This attribute indicates an overheating of a controller.
ConverterOverheat This property indicates an overheating of a converter.
CoolantFlow This attribute indicates a problem with the coolant flow.
CoolantHigh This attribute indicates that the coolant is high limited.
CoolantLow This attribute indicates that the coolant is low limited.
CoolantOverheat This attribute indicates an overheating of the coolant liquid.
Deceleration This attribute indicates a deceleration of a pump.
DirtyImpeller This attribute indicates a dirty impeller.
DriveOverheat This attribute indicates an overheating of a drive.
GeneratorOperation This attribute indicates that the pump is working as a generator (in flow).
Leakage This attribute indicates a leakage problem, e.g. leakage of the mechanical seal.
Lubricant This attribute indicates a problem with the lubricant.
MaximumNumberStarts This attribute indicates that the maximum number of pump start cycles is exceeded.
MaximumOperationTime This attribute indicates that the maximum time of pump operation is exceeded.
MaximumStartsAtTime This attribute indicates that the maximum number of pump start cycles per timespan is exceeded.
MotorHumidity This attribute indicates unacceptable humidity in the motor.
MotorOverheat This attribute indicates an overheating of a motor.
OperationFault This attribute indicates a generic operation problem of a pump.
OverLoad This attribute indicates an over load.
OverSpeed This attribute indicates that the pump operates over normal speed.
PartialLoad This attribute indicates a partial load.
Synchronisation This attribute indicates a synchronization problem of a pump.
TemperatureFault This attribute indicates a generic temperature problem of a pump.
TimeOut This attribute indicates a start up time out.
TMSFailure This attribute indicates a failure of the temperature management system.
TorqueLimit This attribute indicates a limitation problem of a pump.
TurbineOperation This attribute indicates that the pump is working as a turbine (reverse flow).
UnderSpeed This attribute indicates that the pump operates under normal speed.
VelocityLimit This attribute indicates a limitation problem of a pump.
WearReserveExhausted This attribute indicates that the wear reserve of the pump is exhausted.

Previous Next