9 OperationType ToC Previous Next

This ObjectType contains components which are necessary to operate the LDS. It is formally defined in Table 2.

Table 2 – OperationType Definition

Attribute Value        
BrowseName OperationType        
IsAbstract False        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of 0:BaseObjectType defined in OPC UA Part 5          
0:HasProperty Variable DeviceMappingNumber 0:UInt32 0:PropertyType M, RW
0:HasComponent Method IdentifyDevice     O
0:HasProperty Variable HighestActiveAlarmSeverity 0:UInt16 0:PropertyType M, RO
0:HasComponent Variable ActiveErrors 3:Classified ActiveError DataType[] 0:BaseDataVariableType M, RO
0:HasComponent Method ResetAllErrors     O
0:HasComponent Method ResetErrorById     O
0:HasComponent Method SetCycleNumber     O
0:HasProperty Variable MaterialBalanceSystemType MaterialBalance SystemType Enumeration 0:PropertyType M, RO
0:HasProperty Variable ActivateMaterialBalance System 0:Boolean 0:PropertyType O, RW
0:HasComponent Variable DeliveryType 0:UInt16 0:MultiStateValue DiscreteType M, RW
0:HasComponent Object DeliveryPressure   3:ControlledParameterType O
0:HasComponent Variable DeliveryPressure MeasuringPoint 0:UInt16 0:MultiStateValueDiscreteType O, RW
0:HasComponent Object DeliveryFlowrate   3:ControlledParameterType O
0:HasComponent Variable ActualShotWeight 0:Double 0:AnalogItemType O, RO
0:HasComponent Variable SetShotWeight 0:Double 0:AnalogItemType O, RW
0:HasComponent Variable SetValueCompositeDensity 0:Double 0:AnalogItemType O, RW
0:HasComponent Variable MixingRatioTarget 0:Double 0:AnalogItemType O, RW
0:HasComponent Variable MaxDeviationMixingRatio 0:Double 0:AnalogItemType O, RW
0:HasComponent Variable TargetDeviationMixingRatio 0:Double 0:AnalogItemType O, RO
0:HasComponent Variable ActualDeviationMixingRatio 0:Double 0:AnalogItemType O, RO
0:HasComponent Variable RemainingMaterialTime 0:Duration 0:BaseDataVariableType O, RO
0:HasComponent Variable PurgeMode 0:UInt16 0:MultiStateValue DiscreteType O, RW
0:HasProperty Variable PurgeStatus PurgeStatus Enumeration 0:PropertyType O, RO
0:HasComponent Variable ActivateRemoteControl 0:UInt16 0:MultiStateValueDiscreteType M, RW
0:HasComponent Variable RemoteControlActivated 0:UInt16 0:MultiStateValueDiscreteType M, RO
0:HasComponent Method StartDosing     O
0:HasComponent Method StopDosing     O
0:HasComponent Object Component_A   ComponentType M
0:HasComponent Object Component_B   ComponentType M
0:HasComponent Object Additive_<Y>   AdditiveType OP
0:GeneratesEvent Object Type LDSCycleParameters EventType Defined in 9.24    

The BrowseName of ComponentType shal be built of “Component_” and a character ‘A’, ‘B’ , … (e.g. Component_A, Component_B).

The BrowseName of AdditiveType shall be built of “Additive_” and a number from 1 to n. (e.g. Additive_1).

9.1 DeviceMappingNumber ToC Previous Next

Description: Unique identifier/address/number for devices of the same DeviceType within a local network. Several peripheral devices of the same DeviceType can be connected to an IMM. In most applications, the IMM must map the connected peripheral devices to internal logical devices and zones in a fixed configuration (e.g. hot runner systems according to the wiring or temperature control devices according to the tubing).

The mapping shall be stable after reconnecting the devices and is therefore not possible via IP addresses, which can be assigned dynamically via DHCP. DeviceMappingNumber sets the mapping order of peripheral devices of the same type on the local network and is therefore of type UInt32.

Example: 1

Previous Next