20 ProductionDatasetManagementType ToC Previous Next

20.4 ProductionDatasetLists ToC Previous Next

20.4.4 ProductionDatasetInformationType ToC Previous Next

This structure provides information on a production dataset. It does not contain the production dataset file itself.

Table 114 – ProductionDatasetInformationType Definition

Name Type Description
ProductionDatasetInformationType structure Subtype of 0:Structure as defined in OPC UA 10000-3
   Name 0:String Name of the production dataset (=identifier).
   Description 0:String Additional description of the production dataset.
   MESId 0:String Id of the production dataset file assigned by MES.
   CreationTimestamp 0:DateTime Time when the production dataset was originally created or saved with a new name (in UTC time).
   LastModificationTimestamp 0:DateTime Time of the last modification of the production dataset (in UTC time).
   LastSaveTimestamp 0:DateTime Time when the production dataset was saved to the file system of the machine (in UTC time).
   UserName 0:String Name of the user who has made the last parameter change on the machine.
   Components 0:UInt16[] Informs for which machines information is included in the file. The possible values are defined in Table 115. If the production dataset contains information for two machines of the same types, the enumeration value is repeated. Example: The production dataset contains information for 1 injection moulding machine and 2 robots: Components = [0 1 1].
   Manufacturer 0:String These Properties are representing the values stored in the MachineInformation at the time the production dataset file is created.
   SerialNumber 0:String  
   Model 0:String  
   ControllerName 0:String  
   UserMachineName 0:String These Properties are taken from the MachineConfiguration at the time the production dataset file is created.
   LocationName 0:String  
   ProductName 0:String[] These Properties are in analogy with the Properties in the JobInformationType. MouldId and NumCavities are optional in the derived CyclicJobInformationType, so here empty 0:Strings / value zero are possible.
   MouldId 0:String  
   NumCavities 0:UInt32  

NOTE: This meta data shall also be included in the production dataset file itself.

Table 115 – Possible values for Variable Components (used in the context of production datasets)

Name Value Description
IMM 0 Injection moulding machine
ROBOT 1 Robot or handling device
TCD 2 Temperature control device
HOT_RUNNER 3 Hot runner
LDS 4 LSR dosing system
EXTRUSION_LINE 5 Complete extrusion line
EXTRUDER 6 Extruder
HAUL_OFF 7 Haull-off (as part of an extrusion line)
MELT_PUMP 8 Melt pump (as part of an extrusion line)
FILTER 9 Filter (as part of an extrusion line)
DIE 10 Die (as part of an extrusion line)
PELLETIZER 11 Pelletizer (as part of an extrusion line)
CUTTER 12 Cutter (as part of an extrusion line)
CALIBRATOR 13 Calibrator (as part of an extrusion line)
CORRUGATOR 14 Corrugator (as part of an extrusion line)
CALENDER 15 Calender (as part of an extrusion line)

NOTE: The list will be extended when further OPC UA models for other machine types are developed.

Previous Next