CavityCycleQualityEnumeration TOC Previous Next

Quality of the cycle for each cavity.

The fields of the CavityCycleQualityEnumeration DataType are defined in the following table:

Name Value Description
NO_PART 0 There is no part in cavity.
GOOD_PART 1 The machine has detected no failures during the cycle for this cavity and the part quality is assumed as good.
BAD_PART 2 The machine has detected failures during the cycle for the cavity and the part quality is assumed as bad.
REWORK 3 The machine has detected failures during the cycle for the cavity which might be fixed by reworking the part.

The representation of the CavityCycleQualityEnumeration DataType in the address space is shown in the following table:

Name Attribute
NodeId ns=1;i=3020
NamespaceUri http://opcfoundation.org/UA/PlasticsRubber/GeneralTypes/
BrowseName CavityCycleQualityEnumeration
IsAbstract False
SubtypeOf Enumeration
Categories  

The references from the CavityCycleQualityEnumeration DataType Node are shown in the following table:

Reference NodeClass BrowseName DataType TypeDefinition ModellingRule
HasProperty Variable EnumValues EnumValueType[] PropertyType Mandatory