7 Corrugator_InterfaceType ToC Previous Next

7.1 Corrugator_InterfaceType Definition ToC Previous Next

This OPC UA ObjectType is used for the root Object representing a corrugator as part of an extrusion line. It is based on the HaulOff_InterfaceType (defined in OPC 40084-4) and formally defined in Table 1.

The instance(s) of Corrugator_InterfaceType shall be located under the DeviceSet Object of the Server (see OPC UA Part 100).

NOTE: If the OPC UA server is implemented in the control of the corrugator so only one instance of Corrugator_InterfaceType will be created. But it is also possible that one OPC UA server is connected to several machine controls as one interface to the MES. In this case several instances of Corrugator_InterfaceType will be created.

readme_files/image005.gif Figure 1 – Corrugator_InterfaceType Overview

Table 1 – Corrugator_InterfaceType Definition

Attribute Value        
BrowseName Corrugator_InterfaceType        
IsAbstract False        
References Node Class BrowseName DataType TypeDefinition Other
Subtype of 5:HaulOff_InterfaceType (defined in OPC 40084-4)          
0:HasComponent Variable ExtruderEnabled 0:Boolean 0:BaseDataVariableType M, RO
0:HasProperty Variable MouldId 0:String 0:PropertyType M, RO

The BrowseName of the object instance shall be “Corrugator_<Manufacturer>_<SerialNumber>”

Example: “Corrugator_Unicor_0123456”.

Previous Next