6 PROFINET OPC UA Information Model ToC Previous Next

6.3 Base Information Model ToC Previous Next

6.3.2 OPC UA Reference Types ToC Previous Next

6.3.2.1 HasPnApplicationRelation ToC

Table 66 – HasPnApplicationRelation Definition

Attribute Value
BrowseName HasPnApplicationRelation
InverseName IsPnApplicationRelationOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnApplicationRelation reference is used to append nodes to the PnApplicationRelationContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object of the ObjectType PnApplicationRelationType.

6.3.2.2 HasPnRealModule ToC

Table 67 – HasPnRealModule Definition

Attribute Value
BrowseName HasPnRealModule
InverseName IsPnRealModuleOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnRealModule reference type is used to append nodes to the PnRealModuleContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnRealModuleType interface.

6.3.2.3 HasPnRealSubmodule ToC

Table 68 – HasPnRealSubmodule Definition

Attribute Value
BrowseName HasPnRealSubmodule
InverseName IsPnRealSubmoduleOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnRealSubmodule reference type is used to append nodes to the PnRealSubmoduleContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnRealSubmoduleType interface.

6.3.2.4 HasPnExpectedModule ToC

Table 69 – HasPnExpectedModule Definition

Attribute Value
BrowseName HasPnExpectedModule
InverseName IsPnExpectedModuleOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnExpectedModule reference type is used to append nodes to the PnExpectedModuleContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnExpectedModuleType interface.

6.3.2.5 HasPnExpectedSubmodule ToC

Table 70 – HasPnExpectedSubmodule Definition

Attribute Value
BrowseName HasPnExpectedSubmodule
InverseName IsPnExpectedSubmoduleOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnExpectedSubmodule reference type is used to append nodes to the PnExpectedSubmoduleContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnExpectedSubmoduleType interface.

6.3.2.6 HasPnAsset ToC

Table 71 – HasPnAsset Definition

Attribute Value
BrowseName HasPnAsset
InverseName IsPnAssetOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnAsset reference type is used to append nodes to the PnAssetContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object of the ObjectType PnAssetType.

6.3.2.7 HasPnInterface ToC

Table 72 – HasPnInterface Definition

Attribute Value
BrowseName HasPnInterface
InverseName IsPnInterfaceOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnInterface reference type is used to append nodes to the PnInterfaceContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnInterfaceType interface.

6.3.2.8 HasPnPort ToC

Table 73 – HasPnPort Definition

Attribute Value
BrowseName HasPnPort
InverseName IsPnPortOf
Symmetric False
IsAbstract False
Subtype of the HasComponent from [OPC 10000-5].  

The HasPnPort reference type is used to append nodes to the PnPortContainerType node.

This reference should always be bidirectional.

The destination of the reference shall be an object of the ObjectType PnPortType.

6.3.2.9 IsPnRealModule ToC

Table 74 – IsPnRealModule Definition

Attribute Value
BrowseName IsPnRealModule
InverseName IsPnExpectedModule
Symmetric False
IsAbstract False
Subtype of the NonHierarchicalReferences from [OPC 10000-5].  

The IsPnRealModule reference type is used to link ExpectedModule objects to their RealModule counterparts (See Figure 17 – Object Structure).

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnRealModuleType interface.

The source of the reference shall be an object implementing the IPnExpectedModuleType interface.

6.3.2.10 IsPnRealSubmodule ToC

Table 75 – IsPnRealSubmodule Definition

Attribute Value
BrowseName IsPnRealSubmodule
InverseName IsPnExpectedSubmodule
Symmetric False
IsAbstract False
Subtype of the NonHierarchicalReferences from [OPC 10000-5].  

The IsPnRealSubmodule reference type is used to link ExpectedSubmodule objects to their RealSubmodule counterparts (See Figure 17 – Object Structure).

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnRealSubmoduleType interface.

The source of the reference shall be an object implementing the IPnExpectedSubmoduleType interface.

6.3.2.11 IsPnApplicationRelationDeviceInterface ToC

Table 76 – IsPnApplicationRelationDeviceInterface Definition

Attribute Value
BrowseName IsPnApplicationRelationDeviceInterface
InverseName UsedByPnApplicationRelation
Symmetric False
IsAbstract False
Subtype of the NonHierarchicalReferences from [OPC 10000-5].  

The IsPnApplicationRelationDeviceInterface is used to link PnApplicationRelationType objects to the PN Interface object of the Device object (objects implementing IDeviceType) the application relation connects to (See Figure 17 – Object Structure).

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnInterfaceType interface.

The source of the reference shall be an object of the ObjectType PnApplicationRelationType and shall not use the reference type more than once.

6.3.2.12 IsPnApplicationRelationControllerInterface ToC

Table 77 – IsPnApplicationRelationControllerInterface Definition

Attribute Value
BrowseName IsPnApplicationRelationControllerInterface
InverseName UsedByPnApplicationRelation
Symmetric False
IsAbstract False
Subtype of the NonHierarchicalReferences from [OPC 10000-5].  

The IsPnApplicationRelationControllerInterface is used to link PnApplicationRelationType objects to the PN Interface object of the controller object (objects implementing IControllerType) the application relation belongs to (See Figure 17 – Object Structure).

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnInterfaceType interface.

The source of the reference shall be an object of the ObjectType PnApplicationRelationType and shall not use the reference more than once.

6.3.2.13 IsPnInterface ToC

Table 78 – IsPnInterface Definition

Attribute Value
BrowseName IsPnInterface
InverseName RealizedByPnSubmodule
Symmetric False
IsAbstract False
Subtype of the NonHierarchicalReferences from [OPC 10000-5].  

The IsPnInterface reference type is used to link RealSubmodule objects to PN Interface objects (See Figure 18 – Network Topology).

This reference should always be bidirectional.

The destination of the reference shall be an object implementing the IPnInterfaceType interface.

The source of the reference shall be an object implementing the IPnRealSubmoduleType interface.

6.3.2.14 IsPnPort ToC

Table 79 – IsPnPort Definition

Attribute Value
BrowseName IsPnPort
InverseName RealizedByPnSubmodule
Symmetric False
IsAbstract False
Subtype of the NonHierarchicalReferences from [OPC 10000-5].  

The IsPnPort reference type is used to link RealSubmodule objects to PN Port objects (Figure 18 – Network Topology).

This reference should always be bidirectional.

The destination of the reference shall be an object of the ObjectType PnPortType.

The source of the reference shall be an object implementing the IPnRealSubmoduleType interface.

6.3.2.15 CommLinkTo ToC

Table 80 – CommLinkTo Definition

Attribute Value
BrowseName CommLinkTo
InverseName CommLinkFrom
Symmetric False
IsAbstract False
Subtype of the Organizes from [OPC 10000-5].  

The CommLinkTo reference type is used between object instances representing network entities like Ethernet interfaces and Ethernet ports to describe their communication as well as their topology dependencies. (See Figure 18 – Network Topology).

This reference should always be bidirectional.

Previous Next