18 Type definitions for Frying And Grilling Appliance ToC Previous Next

18.2 FryingAndGrillingParameterType ToC Previous Next

18.2.2 Description of the object type ToC Previous Next

18.2.2.1 CurrentState variable ToC

This variable describes the state of the device, e.g. standby or power output.

The data type for the GrillingZoneStateEnumeration is defined in section 18.4.1.

18.2.2.2 GrillingZoneName variable ToC

This variable describes, for example, the position of the grilling zone, such as left grilling zone, right grilling zone.

18.2.2.3 ActualGrillTemperature_<No.> variable ToC

This variable describes the currently measured grilling zone temperature. A grilling zone may consist of one or more areas (e.g. rear, middle, front).

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

18.2.2.4 SetGrillTemperature_<No.> variable ToC

This variable contains the set temperature to which the grilling zone is to be heated. A grilling zone may consist of one or more areas (e.g. rear, middle, front).

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

18.2.2.5 ActualPlatenTemperature_<No.> variable ToC

This variable describes the currently measured grill platen temperature. A grilling zone may consist of one or more areas (e.g. rear, middle, front).

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

18.2.2.6 SetPlatenTemperature_<No.> variable ToC

This variable contains the set temperature to which the grill platen is to be heated. A grilling zone may consist of one or more areas (e.g. rear, middle, front).

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

18.2.2.7 SetProcessTime variable ToC

This variable contains the set value for the grilling zone operating time.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

18.2.2.8 RemainingProcessTime variable ToC

This variable contains the remaining running time of the grilling zone.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

18.2.2.9 PlatenPositionState variable ToC

The variable contains the operating position of the disk.

The data type for the enumeration PlatenPositionState is defined in 18.4.2.

18.2.2.10 IsWithPlaten property ToC

This property indicates whether the grill has a top grill platen (double-sided grilling).

Previous Next