13 Type definitions for Pasta Cooker / Bain Marie

13.2 PastaCookerParameterType

13.2.3 Description of the object type

13.2.3.1 ProgramMode variable 
This variable describes the state of the device, e.g. heating up, frying, etc.
The data type for the PastaCookerModeEnumeration is defined in section 13.4.1.
13.2.3.2 CookingLevel variable 
This variable describes the cooking level with which heating up is to take place. The value is used only in the Cook and CookSlow ProgramMode.
13.2.3.3 SetTemperature variable 
This variable contains the set temperature to which heating up is to take place.
The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.
13.2.3.4 ActualTemperature variable 
This variable describes the currently measured temperature.
The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.
13.2.3.5 SetProcessTime variable 
This variable describes the set process time in seconds.
The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.
13.2.3.6 TimeRemaining variable 
This variable describes the remaining process time in seconds.
The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.
13.2.3.7 SignalMode variable 
This variable describes the state of the signal output. In addition to the on and off states, the “Signal was acknowledged” state is also saved.
The data type for the SignalModeEnumeration is defined in 13.4.2.