11 Type definitions for Cooking Kettle ToC Previous Next

11.2 CookingKettleParameterType ToC Previous Next

11.2.3 Description of the object type ToC Previous Next

11.2.3.1 ProgramMode variable ToC

This variable describes the state of the device, e.g. heating up, frying.

The data type for the CookingKettleModeEnumeration is defined in section 11.4.1.

11.2.3.2 CookingLevel variable ToC

This variable describes the cooking level with which heating up is to take place. The value is used only in the Cook and CookSlow ProgramMode.

11.2.3.3 SetTemperatur variable ToC

This variable contains the set temperature to which heating up is to take place.

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

11.2.3.4 ActualTemperature variable ToC

This variable describes the currently measured temperature.

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

11.2.3.5 SetProcessTime variable ToC

This variable describes the set process time in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

11.2.3.6 RemainingTime variable ToC

This variable describes the remaining process time for cooking in seconds.

The EngineeringUnit property of the AnalogItemType has the value s. The value for the EURange property is device-specific.

11.2.3.7 SetCoreTemperature variable ToC

This variable describes the set core temperature.

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

11.2.3.8 ActualCoreTemperature variable ToC

This variable describes the currently measured core temperature.

The EngineeringUnit property of the AnalogItemType has the value C. The value for the EURange property is device-specific.

11.2.3.9 SignalMode variable ToC

This variable describes the state of the signal output. In addition to the on and off states, the “Signal was acknowledged” state is also saved.

The data type for the SignalModeEnumeration is defined in 11.4.2.

Previous Next