6 OPC UA ObjectTypes ToC Previous Next

6.11 CncMessageType ToC Previous Next

6.11.1 General ToC Previous Next

This OPC UA ObjectType may be used for reporting simple information messages that do not represent an alarm. For instance some CNC systems offer the possibility to trigger messages out of the CNC part program for the purpose of tracking. This would be an example for using the CncMessageType.

As CncMessageType is derived from the OPC UA BaseEventType, it shall be used in most parts as specified in OPC 10000-5.

Figure 19 gives an overview on CncMessageType. It is formally defined in Table 17.

readme_files/image023.png

Figure 19 – CncMessageType

Previous Next