The FluidQuantitiesType provides Variables and Objects for fluid Quantities and is formally defined in Table 47.
Table 47 – FluidQuantitiesType Definition
|
Attribute |
Value |
||||
|
BrowseName |
FluidQuantitiesType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the 0:BaseObjectType defined in OPC 10000-5. |
|||||
|
0:HasInterface |
ObjectType |
3:IStatisticsType |
Defined in OPC 10000-200 |
||
|
|
|
|
|
|
|
|
0:HasComponent |
Variable |
<Quantity> |
0:BaseAnalogType |
OP, RO |
|
|
0:HasComponent |
Variable |
AbsolutePressure |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
AccumulatedVolume |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
DewPoint |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
GaugePressure |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
MassFlowRate |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
OilConcentration |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Object |
ParticlesPerSizeRange |
|
ParticleType |
O |
|
0:HasComponent |
Variable |
RelativeHumidity |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
Temperature |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
Volume |
0:Double |
0:BaseAnalogType |
O, RO |
|
0:HasComponent |
Variable |
VolumeFlowRate |
0:Double |
0:BaseAnalogType |
O, RO |
|
|
|
|
|
|
|
|
Applied from 3:IStatisticsType |
|||||
|
0:HasComponent |
Method |
3:ResetStatistics |
O |
||
|
0:HasProperty |
Variable |
3:StartTime |
0:DateTime |
0:PropertyType |
O, RO |
The Variable StartTime and the Method ResetStatistics are defined by the IStatisticsType and shall be used as defined by the Interface.
The OptionalPlaceholder <Quantity> is used to add additional Quantities to this group. In this case the abstract DataType 0:Number must be changed to a non-abstract DataType. The TypeDefinition may be chosen from BaseAnalogType and its subtypes.
The InstanceDeclarations of the FluidQuantitiesType have additional Attributes defined in Table 48.
Table 48 – FluidQuantitiesType Attribute values for child Nodes
|
Source Path |
Value Attribute |
Description Attribute |
|
<Quantity> |
|
Manufacturer or system specific measurements or calculations. |
|
AbsolutePressure |
|
Measured or calculated actual absolute pressure of a fluid. |
|
AccumulatedVolume |
|
Measured or calculated accumulated volume of a fluid since last reset. |
|
DewPoint |
|
Measured or calculated actual dew point of a fluid. |
|
GaugePressure |
|
Measured or calculated actual gauge pressure of a fluid. |
|
MassFlowRate |
|
Measured or calculated actual mass flow rate of a fluid. |
|
OilConcentration |
|
Measured or calculated actual oil concentration of a fluid. |
|
ParticlesPerSizeRange |
|
Collection of particle counts for a fluid according to ISO 8573. |
|
RelativeHumidity |
|
Measured or calculated actual relative humidity of a fluid. |
|
Temperature |
|
Measured or calculated actual temperature of a fluid. |
|
Volume |
|
Measured or calculated actual volume of a fluid. |
|
VolumeFlowRate |
|
Measured or calculated actual volume flow rate of a fluid. |