Annex F (informative) – ADI address space ToC Previous Next

F.3 Parameters ToC Previous Next

This section helps define, initialise and position Parameters in the Analyser Server address space.

F.3.1 What is a Parameter? ToC Previous Next

A configuration parameter defining one of the settings of the hardware of the analyser. A configuration parameter defining one of the settings of the behaviour of the analyser. A status parameter exposing the state / status of the hardware of the analyser i.e. power supply temperature. A status parameter exposing the state / status of the behaviour of the analyser i.e. which Stream is active? A configuration parameter defining one of the settings of the hardware of the analyser for the current acquisition or the one to be started i.e. gain of a detector. A configuration parameter defining one of the settings of the behaviour of the analyser for the current acquisition or the one to be started i.e.: duration of the acquisition. A status parameter exposing the state / status of the hardware of the analyser for the current acquisition or the one to be started i.e. detector gain too high. A status parameter exposing the state / status of the behaviour of the analyser for the current acquisition or the one to be started i.e. % done of the ongoing acquisition. A result parameter exposing results generated by the analyser or derived from it i.e. absorbance spectrum, particle size distribution, concentration. A ChemometricModel parameter exposing the model definition used to convert ScaledData to derived properties e.g. concentration derived from the absorbance spectrum. An input I/O from a PLC indicating when the sample is ready. An output I/O telling the sampling system that it can now grab a sample from the process.

Previous Next