Annex A (informative) – Example of extending ADI Information Model for particle size monitor devices ToC Previous Next

A.3 Accessories of ParticleSizeMonitorDeviceType ToC Previous Next

A.3.3 Subtypes of DispersionAccessoryType ObjectType ToC Previous Next

Subtypes of DispersionAccessoryType are optional. The definitions below serve as an example for Laser Diffraction or Image Analysers. Other technologies might require other definitions or none at all.

A.3.3.1 LiquidDispersionUnitType ToC

A.3.3.1.1 Type definition: LiquidDispersionUnitType ObjectType ToC

Table 101 - LiquidDispersionUnitType

Attribute Value
BrowseName LiquidDispersionUnitType
IsAbstract False

Subtype of the DispersionAccessoryType defined in A.3.1.

References NodeClass BrowseName DataType TypeDefinition ModellingRule
           

A.3.3.1.2 Instance definition: LiquidDispersionUnit Object ToC

This Object defines an instance of the LiquidDispersionUnitType as defined in.

A.3.3.1.3 Parameters of LiquidDispersionUnitType ToC

LiquidDispersionUnitType has the following Parameters defined.

Table 102 – LiquidDispersionUnitType Configuration Parameters

BrowseName Description VariableType Optional/
Mandatory
PumpSpeed Pump Speed allowing transporting the sample to the analyser AnalogItemType
(DataType=Double)
O
StirrerSpeed Stirrer Speed allowing mixing sample and dispersant AnalogItemType
(DataType=Double)
O
Ultrasonic Ultrasonic power allowing breaking agglomerate AnalogItemType
(DataType=Double)
O
UltrasonicMode Apply ultrasonic continuously or periodically . (may be more option MultiStateDiscreteType
(Vendor specific enumeration)
O
UltrasonicTimeOn Time the ultrasonic has to be ON AnalogItemType
(DataType=Double)
O
UltrasonicTimeOff Time the ultrasonic has to be OFF AnalogItemType
(DataType=Double)
O

Table 103 – LiquidDispersionUnitType Status Parameters

BrowseName Description VariableType Optional/
Mandatory
Mode Accessory mode MultiStateDiscreteType
O

All Parameters organized by the Status FunctionalGroup on a LiquidDispersionUnitType shall be read-only.

A.3.3.2 GasDispersionUnitType ToC

A.3.3.2.1 Type definition: GasDispersionUnitType ObjectType ToC

Table 104 – GasDispersionUnitType Object

Attribute Value
BrowseName GasDispersionUnitType
IsAbstract False

Subtype of the DispersionAccessoryType defined in A.3.1

References NodeClass BrowseName DataType TypeDefinition ModellingRule
           

A.3.3.2.2 Instance definition: GasDispersionUnit Object ToC

This Object defines an instance of the GasDispersionUnitType Object as defined in Table 104

A.3.3.2.3 Parameters of GasDispersionUnitType ToC

GasDispersionUnitType has the following Parameters defined.

Table 105 – GasDispersionUnitType Configuration Parameters

BrowseName Description VariableType Optional/
Mandatory
Pressure Pressure allowing dispersion AnalogItemType
(DataType=Double)
O
Flow Gas flow for dispersing AnalogItemType
(DataType=Double)
O
FeedRate Vibration Feeder AnalogItemType
(DataType=Double)
O

Table 106 - GasDispersionUnitType Status Parameters

BrowseName Description VariableType Optional/
Mandatory
Mode Accessory mode MultiStateDiscreteType
O

All Parameters organized by the Status FunctionalGroup on a GasDispersionUnitType shall be read-only.

Previous Next