Search

6 result(s) for PriorityMappingTable

• OPC-10000-22 – OPC Unified Architecture - Part 22: Base Network Model
  5.5.2.2 PriorityMappingTableType definition
  PriorityLabel . The combination of QosCategory and PriorityLabel are used as indices into the referenced PriorityMappingTable to look up the priority values. The reference from an IetfBaseNetworkInterface is described in Section
• OPC-10000-82 – OPC Unified Architecture - Part 82: UAFX Networking
  5.6.1 Overview
  based QoS at the Ethernet layer. The OPC UA Communication Stack then uses a PriorityMappingTable (see OPC 10000‑22 ) to translate the abstract QoS category and label of a Connection
• OPC-10000-82 – OPC Unified Architecture - Part 82: UAFX Networking
  5.6.4.2 Application and QoS engineering
  priority-based QoS for a UAFX Application , Engineer A sets up and references a PriorityMappingTable from each physical network interface available to the UAFX Application . Virtual interfaces inherit the PriorityMappingTable ... from the physical interface if they do not reference a PriorityMappingTable directly. A PriorityMappingTable consists of entries that map a combination of abstract QosCategory and PriorityLabel values to concrete
• OPC-10000-82 – OPC Unified Architecture - Part 82: UAFX Networking
  5.6.4.4 System integration
  instead of PCP 2, as defined in Table 1 . Clause 6.5.4 specifies the default PriorityMappingTable assigned to the physical interfaces. Only if the Network Engineer requires a different usage ... configured QoS mechanisms in the network does the System Commissioner update the PriorityMappingTable on all UAFX Stations accordingly (i.e., the PCP and DSCP values for the different QosCategory - PriorityLabel combinations
• OPC-10000-82 – OPC Unified Architecture - Part 82: UAFX Networking
  5.6.4.5 Connection establishment and operation
  Figure 1 ) uses the QosCategory and PriorityLabel values in the WriterGroup with the PriorityMappingTable to derive the actual PCP and DSCP priority values to use for the corresponding ... with Ethernet. See OPC 10000‑14 for a detailed description of how the PriorityMappingTable and Address Variable are used with PubSub communications for priority-based
• OPC-10000-82 – OPC Unified Architecture - Part 82: UAFX Networking
  6.5.4 Default PriorityMappingTable configuration
  Default PriorityMappingTable configuration A UAFX Station shall provide a PriorityMappingTable with at least the default entries for MappingUri/QosCate gory and PriorityLabel as defined in Table 3 . If PCP and DSCP