ControlModeEnumeration
http://opcfoundation.org/UA/PlasticsRubber/GeneralTypes/
1.03
2021-05-10
| NodeId | ns=1;i=3001 |
| NodeClass | DataType |
| BrowseName | 1:ControlModeEnumeration |
| DisplayName | ControlModeEnumeration |
| Description | Indication how the parameter is currently controlled |
| BaseType | 0:Enumeration |
| IsAbstract | False |
| Name | Value | Description |
|---|---|---|
| OTHER | 0 | This state is used if none of the other states below apply |
| OFF | 1 | Control is switched off |
| AUTOMATIC | 2 | The parameter is controlled automatically |
| TUNING | 3 | Optimisation of the control circuit |
| STANDBY | 4 | Parameter is controlled to stand by value |
| OPEN_LOOP | 5 | Open loop control is used |
| ONLY_MEASUREMENT | 6 | The sensors deliver the current value but there is no controlling |
| Reference | NodeClass | BrowseName | TypeDefinition | DataType | Other |
|---|---|---|---|---|---|
| 0:HasProperty | Variable | 0:EnumValues | 0:PropertyType | 0:EnumValueType[7] | M |