| Other |
0 |
The dryer is in a state not specified by this enumeration. |
| Stopped |
1 |
The dryer is stopped. This state is applicable to all adsorption dryers. |
| Running |
2 |
The dryer is running. This state is applicable to all dryers. |
| RefrigerantCompressorStopped |
3 |
The compressor of the refrigerant circuit is standing still, and the refrigerant dryer is operating using the stored cold. This state is applicable to refrigerant dryers. |
| RefrigerantCompressorRunning |
4 |
The compressor of the refrigerant circuit is running and compressing refrigerant, creating cold. This state is applicable to refrigerant dryers. |
| PurgeValveClosed |
5 |
Purge valve is closed, and no purge air is consumed, no purge of the humidity from membranes dryer. This state is applicable to membrane dryers. |
| PurgeValveOpen |
6 |
Purge air can flow to purge the humidity out of the membrane dryer. This state is applicable to membrane dryers. |
| ParallelModeOfBothVessels |
7 |
Both vessels of the adsorption dryer are used in parallel for adsorption. This state is applicable to all adsorption dryers. |
| Depressurizing |
8 |
One vessel of the adsorption dryer is depressurized for regeneration. This state is applicable to heatless and heated adsorption dryers, not HOC. |
| Desorbing |
9 |
One vessel of the adsorption dryer is in desorption phase, using purge or ambient air, heated or not heated. This state is applicable to all adsorption dryers. |
| Cooling |
10 |
One vessel of the adsorption dryer is being cooled after being heated in the previous desorption phase. This state is applicable to heated adsorption dryers and HOC. |
| Pressurizing |
11 |
The depressurized vessel is pressurized again. This state is applicable to heatless and heated adsorption dryers, not HOC. |
| RegeneratedVesselInStand-by |
12 |
The regenerated vessel is in standby and ready for adsorption phase. This state is applicable to all adsorption dryers. |