WireMountingDetail
http://opcfoundation.org/UA/WireHarness/VEC/
1.0.0
2025-04-01
| NodeId | ns=1;i=3008 |
| NodeClass | DataType |
| BrowseName | 1:WireMountingDetail |
| DisplayName | WireMountingDetail |
| BaseType | 1:ExtendableElement |
| IsAbstract | False |
| Field Name | Data Type | Allow Subtypes | Description |
|---|---|---|---|
| CoreCrimpSize | 1:Size[1] | Yes | <p>Defines the required core crimp size (width & height) of this specific wire mounting situation.</p> |
| InsulationCrimpSize | 1:Size[1] | Yes | <p>Defines the required insulation crimp size (width & height) of this specific wire mounting situation.</p> |
| WireTipProtrusion | 1:ValueRange[1] | Yes | <p>Defines the valid length range in which the protrusion of the conductor from the conductor crimp must be located.</p> |
| ContactedWireReception | 1:WireReceptionReferenceIdDataType | Yes | References the WireReception that is used for the WireMounting. |
| ReferencedWireEnd | 1:WireEndIdDataType[] | Yes | References the WireEnds that are mounted to referenced WireReception. A cardinality of more than one is allowed in order support parallel connectors, where multiple wire ends are placed on one side of the connector (one wire reception) and the other wire ends are placed on the other side of the connector (the other wire reception). |
| AbsoluteSealPosition | 1:NumericalValue | Yes | The absoluteSealPosition defines distance between the conductor tip and edge of the CavitySeal facing the conductor tip. |
| CorePullOffForce | 1:NumericalValue[1] | Yes | The minimum force that the completed crimp (core crimp only, insulation crimp non-functional) should withstand when wire is being pulled off the terminal. Above that force, the crimp can be expected to be destroyed at any time. |