WireReceptionSpecification
http://opcfoundation.org/UA/WireHarness/VEC/
1.0.0
2025-04-01
| NodeId | ns=1;i=3380 |
| NodeClass | DataType |
| BrowseName | 1:WireReceptionSpecification |
| DisplayName | WireReceptionSpecification |
| BaseType | 1:Specification |
| IsAbstract | False |
| Field Name | Data Type | Allow Subtypes | Description |
|---|---|---|---|
| InsulationDisplacementLength | 1:NumericalValue | Yes | <p>Specifies the length of the insulation which must be stripped off to fit to this wire reception.</p> |
| ConductorCrimpLength | 1:NumericalValue[1] | Yes | <p>Specifies the length of the conductor crimp (wire reception, see diagram "Terminal Dimensions").</p> |
| CrimpConnectionLength | 1:NumericalValue | Yes | <p>Specifies the length of the crimp area, conductor + insulation crimp (wire reception, see diagram "Terminal Dimensions").</p> |
| InsulationCrimpLength | 1:NumericalValue[1] | Yes | <p>Specifies the length of the insulation crimp (wire reception, see diagram "Terminal Dimensions").</p> |
| WireTipProtrusion | 1:ValueRange[1] | Yes | <p>Defines the valid length range in which the protrusion of the conductor from the conductor crimp must be located.</p> |
| CoreCrimpDetails | 1:CoreCrimpDetail[] | Yes | <p>Defines the<i>CrimpDetails</i>for this WireReception.</p> |
| CrimpBarrelType | 1:CrimpBarrelType | When the crimp barrel is open, the wire can be laid into the terminal from above. If the crimp barrel is closed, the wire must be fed in from the front. |