Table 21 - IToolType Definition
|
Attribute |
Value |
||||
|
BrowseName |
IToolType |
||||
|
IsAbstract |
True |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Others |
|
Subtype of the ITighteningSystemAssetType, inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasComponent |
Object |
Parameters |
-- |
0:FolderType |
M |
The components of the IToolType have additional subcomponents which are defined in Table 22.
Table 22 - IToolType Additional Subcomponents
|
Source Path |
Reference |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Others |
|
Parameters |
0:HasComponent |
Variable |
Type |
0:Byte |
0:MultiStateDiscreteType |
M, RO |
|
Parameters |
0:HasComponent |
Variable |
DesignType |
0:Byte |
0:MultiStateDiscreteType |
M, RO |
|
Parameters |
0:HasComponent |
Variable |
DriveMethod |
0:Byte |
0:MultiStateDiscreteType |
M, RO |
|
Parameters |
0:HasComponent |
Variable |
DriveType |
0:Byte |
0:MultiStateDiscreteType |
M, RO |
|
Parameters |
0:HasComponent |
Variable |
MaxTorque |
0:Double |
JoiningDataVariableType |
M, RO |
|
Parameters |
0:HasComponent |
Variable |
MinTorque |
0:Double |
JoiningDataVariableType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
ShutOffMethod |
0:Byte |
0:MultiStateDiscreteType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
MaxSpeed |
0:Double |
JoiningDataVariableType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
MotorType |
0:String |
0:BaseDataVariableType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
TotalNumberOfTighteningsSinceService |
0:Int32 |
0:BaseDataVariableType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
TotalNumberOfTightenings |
0:Int32 |
0:BaseDataVariableType |
O, RO |
The mandatory Type is the classification of a Tool.
The mandatory DesignType provides information on the design of the Tool.
The mandatory DriveMethod provides information on the drive method of the motor of the Tool.
The mandatory DriveType provides information on the drive type of the Tool.
The optional ShutOffMethod provides information on the shutoff method of the tool.
In Table 23, standardized values for the EnumStrings attribute for the above listed variables is defined. Each instance of the following variables Type, DesignType, DriveMethod, DriveType, ShutOffMethod shall follow the defined sequence for the entries.
Note: Servers can add additional entries into the EnumStrings array and may provide translations of the texts in different locales.
The mandatory MaxTorque is the maximum allowed torque for which the tool may be used for tightening processes. For Click Wrenches, it may not be available.
The optional MinTorque is the minimum allowed torque for which the tool may be used for tightening processes.
The optional MaxSpeed is the maximum rotation speed of the driving shaft.
The optional MotorType is the type of motor in the tool.
The optional TotalNumberOfTighteningsSinceService is the total number of tightenings executed by the tool since the last service of the tool.
The optional TotalNumberOfTightenings is the total number of tightenings executed by the tool. It is incremented by 1 to capture total number of tightenings.
Table 23 - IToolType Attribute values for child nodes
|
BrowsePath |
Value Attribute |
|||
|
OTHER FIXTURED HANDHELD MANUAL |
|||
|
OTHER PISTOL ANGLE STRAIGHT OFFSET |
|||
|
OTHER CONTINUOUS PULSE RATCHETING TENSIONING MANUAL |
|||
|
OTHER ELECTRIC HYDRAULIC PNEUMATIC MANUAL |
|||
|
OTHER MECHANICAL CURRENT TRANSDUCER |