[RQ7.2] Each SafetyProvider shall implement the parameters as shown in Table 11 which can be set via the SPI. The mechanisms for setting these parameters are vendor specific.
Table 14 – SPI of the SafetyProvider
|
Identifier |
Type |
Range |
Note |
|
SafetyBaseID |
GUID |
See GUID |
Base-ID of the SafetyProvider, which is normally used, see Clause 3.2.25. and Clause 11.1.1. For dynamic systems, the safety application program can overwrite this ID by providing a non-zero value at the input SafetyBaseID of the SafetyProvider’ s SAPI. |
|
SafetyProviderID |
UInt32 |
1 - 0xFFFFFFFF |
Provider-ID of the SafetyProvider, see Clause 3.2.26 and Clause 11.1.1. |
|
SafetyStructureSignature |
UInt32 |
1 – 0xFFFFFFFF |
Signature of the SafetyData structure, for calculation see Clause 8.1.3.4 |