The PtMotorStarterAttributesType provides the common asset attributes of a motor starter and is formally defined in Table 117. Additional attributes can be found in IEC CDD 62683DB.
Table 117 – PtMotorStarterAttributesType Definition
|
Attribute |
Value |
||||
|
BrowseName |
PtMotorStarterAttributesType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the PtAssetAttributesType defined in chapter 7.7 |
|||||
|
0:HasProperty |
Variable |
OverloadCurrentSettingRange |
0:Range |
0:PropertyType |
M, RO |
|
0:HasComponent |
Variable |
TripClass |
0:UInt16 |
0:MultiStateValueDiscreteType |
M, RO |
|
0:HasProperty |
Variable |
OperationalCurrentAC3At400VRated |
0:Float |
0:PropertyType |
M, RO |
|
0:HasProperty |
Variable |
NumberofMainContactsNO |
0:UInt16 |
0:PropertyType |
M, RO |
|
0:HasProperty |
Variable |
ControlVoltageAC50HzRangeRated |
0:Range |
0:PropertyType |
M, RO |
|
0:HasProperty |
Variable |
NumberofAuxiliaryContactsNO |
0:UInt16 |
0:PropertyType |
M, RO |
|
0:HasProperty |
Variable |
NumberofAuxiliaryContactsNC |
0:UInt16 |
0:PropertyType |
M, RO |
|
Conformance Units |
|||||
|
Powertrain Attributes Information |
|||||
TripClass provides the classification for thermal protective devices regarding the value of the maximum tripping time in seconds. The values of the MultiStateValueDiscreteType variable are defined in Table 118 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.
Table 118 – PtMotorStarterAttributesType Values for child nodes
|
BrowsePath |
Value Attribute |
Description Attribute |
||
|
[ { "Value": 0, "DisplayName": "CLASS_2E", "Description": "Thermal protection class 2E" }, { "Value": 1, "DisplayName": "CLASS_3E", "Description": "Thermal protection class 3E" }, { "Value": 2, "DisplayName": "CLASS_5", "Description": "Thermal protection class 5" }, { "Value": 3, "DisplayName": "CLASS_5E", "Description": "Thermal protection class 5E" }, { "Value": 4, "DisplayName": "CLASS_10", "Description": "Thermal protection class 10" }, { "Value": 5, "DisplayName": "CLASS_10A", "Description": "Thermal protection class 10A" }, { "Value": 6, "DisplayName": "CLASS_10E", "Description": "Thermal protection class 10E" }, { "Value": 7, "DisplayName": "CLASS_20", "Description": "Thermal protection class 20" }, { "Value": 8, "DisplayName": "CLASS_20E", "Description": "Thermal protection class 20E" }, { "Value": 9, "DisplayName": "CLASS_30", "Description": "Thermal protection class 30" }, { "Value": 10, "DisplayName": "CLASS_30E", "Description": "Thermal protection class 30E" }, { "Value": 11, "DisplayName": "CLASS_40E", "Description": "Thermal protection class 40E" } ] |
|
The 0:EnumValues of the TripClass have additional references to the CDD which are defined in Table 119.
Table 119 – TripClass CDD entries
|
EnumValue |
CDD Entry |
|
CLASS_2E |
|
|
CLASS_3E |
|
|
CLASS_5 |
|
|
CLASS_5E |
|
|
CLASS_10 |
|
|
CLASS_10A |
|
|
CLASS_10E |
|
|
CLASS_20 |
|
|
CLASS_20E |
|
|
CLASS_30 |
|
|
CLASS_30E |
|
|
CLASS_40E |
All other PtMotorStarterAttributesType properties are descripted in IEC Common Data Dictionary (CDD).
The properties of the PtMotorStarterAttributesType have additional references which are defined in Table 120.
Table 120 – PtMotorStarterAttributesType Additional References
|
SourceBrowsePath |
Reference Type |
Is Forward |
TargetBrowsePath |
|
OverloadCurrentSettingRange |
0:HasDictionaryEntry |
0:True |
|
|
TripClass |
0:HasDictionaryEntry |
0:True |
|
|
OperationalCurrentAC3At400VRated |
0:HasDictionaryEntry |
0:True |
|
|
NumberofMainContactsNO |
0:HasDictionaryEntry |
0:True |
|
|
ControlVoltageAC50HzRangeRated |
0:HasDictionaryEntry |
0:True |
|
|
NumberofAuxiliaryContactsNO |
0:HasDictionaryEntry |
0:True |
|
|
NumberofAuxiliaryContactsNC |
0:HasDictionaryEntry |
0:True |