The PtPrechargeAttributesType provides the attributes describing a pre-charge asset and is formally defined in Table 109.
Table 109 – PtPrechargeAttributesType Definition
|
Attribute |
Value |
||||
|
BrowseName |
PtPrechargeAttributesType |
||||
|
IsAbstract |
False |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the PtAssetAttributesType defined in chapter 7.7 |
|||||
|
0:HasComponent |
Variable |
PreChargeType |
0:UInt16 |
0:MultiStateValueDiscreteType |
M, RO |
|
0:HasComponent |
Variable |
PreChargeTime |
0:Float |
0:AnalogUnitType |
O,RO |
|
0:HasComponent |
Variable |
PreChargeTimeout |
0:Float |
0:AnalogUnitType |
O,RO |
|
0:HasComponent |
Variable |
PrechargeThreshold |
0:Float |
0:AnalogUnitType |
O,RO |
|
0:HasComponent |
Variable |
PreChargeMaximumCapacitance |
0:Float |
0:AnalogUnitType |
O,RO |
|
0:HasComponent |
Variable |
PreChargeCycleTimeLimit |
0:Float |
0:AnalogUnitType |
O,RO |
|
Conformance Units |
|||||
|
Powertrain Attributes Information |
|||||
PreChargeType defines if the pre-charge applies to AC or DC voltages. The values of the MultiStateValueDiscreteType variable are defined in Table 110 and shall be used. The values 0-199 are reserved for future extensions of this specification. The values 200-299 shall be used for vendor-specific extensions of this variable.
Table 110 – PtPrechargeAttributesType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
Description Attribute |
||
|
[ { "Value": 0, "DisplayName": "AC/DC", "Description": "AC input, DC output" }, { "Value": 1, "DisplayName": "DC/DC", "Description": "DC input, DC output" } ] |
|
PreChargeTime is the time required to increase pre-charge output voltage from zero to the PreChargeThreshold with a load of PreChargeMaximumCapacitance. The unit shall be seconds [s].
PreChargeThreshold is the pre-charge output voltage where the pre-charge function stops. The unit shall be volts [V].
PreChargeTimeout is the time limit of the pre-charge operation. The pre-charge starts operating when it detects an applied voltage and stops operating after this time regardless of the DC bus voltage. The unit shall be seconds [s].
PreChargeMaximumCapacitance is the maximum DC bus capacitance that can safely be charged and discharged over the PreChargeCycleTimeLimit time. The unit shall be farads [F].
PreChargeCycleTimeLimit is the minimum time period between making connections to the charging source. This time limit may be an average over some longer time period. The unit shall be seconds [s].
Note: The object definitions for PtCapacitanceAttributes differ from the capacitance defined here.