OperatingModeEnumeration TOC Specification

Actual operating mode of the TCD.

The fields of the OperatingModeEnumeration DataType are defined in the following table:

Name Value Description
OTHER 0 Operating mode of the TCD is unknown.
READY_TO_OPERATE 1 TCD is ready to operate (heating, pump and cooling are switched off).
NORMAL_OPERATION 2 TCD is running in normal operating mode.
LEAK_STOPPER 3 TCD is running in leak stopper operating mode.
MOULD_EVACUATION 4 TCD is carrying out a mould evacuation process.
PRESSURE_RELIEF 5 TCD is carrying out a pressure relief process.
COOLING 6 TCD is cooling down to StandbyTemperature and switch off.
SAFETY_COOLING 7 TCD is cooling down to SwitchingOffTemperature and switch off.
ECO 8 TCD is running in Eco operating mode (energy is saved via the reduced pump speed).
BOOST 9 TCD is running in Boost operating mode (pump runs at maximum possible speed).

The representation of the OperatingModeEnumeration DataType in the address space is shown in the following table:

Name Attribute
NodeId ns=1;i=3002
NamespaceUri http://opcfoundation.org/UA/PlasticsRubber/TCD/
BrowseName OperatingModeEnumeration
IsAbstract False
SubtypeOf Enumeration

The references from the OperatingModeEnumeration DataType Node are shown in the following table:

Reference NodeClass BrowseName DataType TypeDefinition ModellingRule
HasProperty Variable EnumValues EnumValueType[] PropertyType Mandatory