The JobStatus Property represents the current status of the job.
Table 86 – JobStatusEnumeration Definition
|
Name |
Value |
Description |
|
OTHER |
0 |
This state is used if none of the other states below apply. Set by operator. |
|
TRANSFERRED_ASSIGNED |
1 |
The job has been transferred to the machine and assigned as current job. |
|
SET_UP_ACTIVE |
2 |
The operator prepares the machine for the job. |
|
SET_UP_INTERRUPTED |
3 |
The operator has interrupted but not finished the preparation of the machine for the job. |
|
SET_UP_FINISHED |
4 |
The operator has finished the preparation of the machine for the job. |
|
START_UP_ACTIVE |
5 |
The operator is setting the machine in the start-up phase. |
|
JOB_IN_PRODUCTION |
6 |
The machine is producing parts/products for the job. |
|
JOB_INTERRUPTED |
7 |
The job is interrupted. The nominal output is not reached. |
|
JOB_FINISHED |
8 |
Nominal output reached. |
|
TEAR_DOWN_ACTIVE |
9 |
The operator tears the machine down. |
|
TEAR_DOWN_INTERRUPTED |
10 |
Tear-down is interrupted but not finished. |
|
TEAR_DOWN_FINISHED |
11 |
Tear-down is finished. |
The JobStatus is set by the machine/operator. This can be triggered by the methods StartJob, InterruptJob and FinishJob. The selection of the value JOB_IN_PRODUCTION_6 can be prevented by the client by setting ProductionReleased to FALSE (see 14.7.2).