JobStatusEnumeration TOC Previous Next

Current status of the job.

The fields of the JobStatusEnumeration DataType are defined in the following table:

Name Value Description
OTHER 0 This state is used if none of the other states below apply.
TRANSFERRED_ASSIGNED 1 The job has been transferred to the machine and assigned as current job.
SET_UP_ACTIVE 2 The operator prepares the machine for the job.
SET_UP_INTERRUPTED 3 The operator has interrupted but not finished the preparation of the machine for the job.
SET_UP_FINISHED 4 The operator has finished the preparation of the machine for the job.
START_UP_ACTIVE 5 The operator is setting the machine in the start-up phase.
JOB_IN_PRODUCTION 6 The machine is producing parts/products for the job.
JOB_INTERRUPTED 7 The job is interrupted. The nominal output is not reached.
JOB_FINISHED 8 Nominal output reached.
TEAR_DOWN_ACTIVE 9 The operator tears the machine down.
TEAR_DOWN_INTERRUPTED 10 Tear-down is interrupted but not finished.
TEAR_DOWN_FINISHED 11 Tear-down is finished.

The representation of the JobStatusEnumeration DataType in the address space is shown in the following table:

Name Attribute
NodeId ns=1;i=3017
BrowseName JobStatusEnumeration
IsAbstract False
SubtypeOf Enumeration

The references from the JobStatusEnumeration DataType Node are shown in the following table:

Reference NodeClass BrowseName DataType TypeDefinition ModellingRule
HasProperty Variable EnumValues EnumValueType[] PropertyType Mandatory