The ConfigurationParameters Property contains a list of parameters, that can be used within the job description to configure the production of the extrusion line. The ConfigurationParametersType is defined in OPC 40083.
The following configuration parameters are standardized for OPC 40084-2:
Table 2 – Standardized configuration parameters for OPC 40084-2
|
Id |
Name (for English version of LocalizedText) |
DataType |
|
1 |
Length |
Double |
|
2 |
Width |
Double |
|
3 |
Thickness |
Double |
|
4 |
Diameter |
Double |
|
5 |
Wall thickness |
Double |
|
6 |
Pieces |
Double |
|
7 |
Weight |
Double |
Manufacturer dependent configuration parameters shall have an Id ≥ 100.