PlasticsRubber - Extrusion - Extrusion Line - 8 Management of Jobs with job groups and jobs

8 Management of Jobs with job groups and jobs

The definition which product (family) is produced is done by a job group. This defines which equipment, production dataset and materials are used and which configuration parameters (e.g. width, length of foil) are offered. The concrete products (roll of film with defined width and length) are models as jobs inside this group.

NOTE: Examples for different combinations of jobs are presented in the Annex.

Figure 2 – Job Management Overview

8.1 JobGroups

This is a container for the job groups.

Table 4 – JobGroupsType Definition

Attribute	Value
BrowseName	JobGroupsType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseObjectType defined in OPC 10000-5
0:HasProperty	Variable	0:NodeVersion	0:String	0:PropertyType	M, RO
0:HasComponent	Object	JobGroup_<Nr>		JobGroupType	OP
0:HasComponent	Method	AddJobGroup			O
0:HasComponent	Method	RemoveJobGroupById			O
0:HasComponent	Method	StartJobGroupById			O
0:HasComponent	Method	InterruptJobGroupById			O
0:HasComponent	Method	FinishJobGroupById			O
0:GeneratesEvent	ObjectType	JobGroupStatusChangedEventType	Defined in 8.2.23
0:GeneratesEvent	ObjectType	JobStatusChangedEventType	Defined in 8.3.17
0:GeneratesEvent	ObjectType	UnitFinishedEventType	Defined in 8.3.18
0:GeneratesEvent	ObjectType	LotFinishedEventType	Defined in 8.3.19
0:GeneratesEvent	ObjectType	0:GeneralModelChangeEventType
Conformance Units
OPC 40084-2 Jobs

8.1.1 NodeVersion

The NodeVersion Property as defined in OPC 10000-3 is used to inform the client about model changes. Here it informs about added or removed instances of JobGroupType.

8.1.2 JobGroup_<Nr>

This is a placeholder for the job groups (see 8.2). When instances are created the BrowseNames shall be “JobGroup_<Nr>” where <Nr> is a three-digit number with leading zeros, starting with “001”.

8.1.3 AddJobGroup

This method adds a new job group with the needed Properties.

Signature

AddJobGroup (

[in]0:StringId

[in]0:StringDescription

[in]0:StringEquipmentDescription

[in]0:StringProductionDatasetName

[in]MaterialMappingType[]MaterialMapping

[in]0:UInt32Priority

[in]0:UtcTimePlannedStart

[in]0:DurationPlannedProductionTime

[in]0:DurationPlannedSetUpTime

[in]0:UtcTimeLatestEnd

[out]0:NodeIdJobGroupNodeId);

Table 5 – AddJobGroup Method Arguments

Argument	Description
Id	See 8.2, where the Properties of a job group are defined.
Description	See 8.2, where the Properties of a job group are defined.
EquipmentDescription	See 8.2, where the Properties of a job group are defined.
ProductionDatasetName	See 8.2, where the Properties of a job group are defined.
MaterialMapping	See 8.2, where the Properties of a job group are defined.
Priority	See 8.2, where the Properties of a job group are defined.
PlannedStart	See 8.2, where the Properties of a job group are defined.
PlannedProductionTime	See 8.2, where the Properties of a job group are defined.
PlannedSetUpTime	See 8.2, where the Properties of a job group are defined.
LatestEnd	See 8.2, where the Properties of a job group are defined.
JobGroupNodeId	The method returns the NodeId of the created instance for the job group

Table 6 – AddJobGroup Method AddressSpace Definition

Attribute	Value
BrowseName	AddJobGroup
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory
0:HasProperty	Variable	0:OutputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.1.4 RemoveJobGroupById

This method removes a job group instance.

Signature

RemoveJobGroupById (

[in]0:StringId);

Table 7 – RemoveJobGroupById Method Arguments

Argument	Description
Id	Id of the job group that shall be removed

Table 8 – RemoveJobGroupById Method AddressSpace Definition

Attribute	Value
BrowseName	RemoveJobGroupById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.1.5 StartJobGroupById

With this method the client requests to start the production of a specific job group.

Signature

StartJobGroupById (

[in]0:StringId);

Table 9 – StartJobGroupById Method Arguments

Argument	Description
Id	Id of the job group that shall be started

Table 10 – StartJobGroup Method AddressSpace Definition

Attribute	Value
BrowseName	StartJobGroupById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.1.6 InterruptJobGroupById

With this method the client requests to interrupt the production of a specific job group.

Signature

InterruptJobGroupById (

[in]0:StringId);

Table 11 – InterruptJobGroupById Method Arguments

Argument	Description
Id	Id of the job group that shall be interrupted

Table 12 – InterruptJobGroupById Method AddressSpace Definition

Attribute	Value
BrowseName	InterruptJobGroupById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

To continue the production of the job group, StartJobGroupById is called.

8.1.7 FinishJobGroupById

With this method the client requests to finish the production of a specific job group.

Signature

FinishJobGroupById (

[in]0:StringId);

Table 13 – FinishJobGroupById Method Arguments

Argument	Description
Id	Id of the job group that shall be finished

Table 14 – FinishJobGroupById Method AddressSpace Definition

Attribute	Value
BrowseName	FinishJobGroupById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.1.8 Events

The JobGroups Object fires all Events related to the included job groups and jobs. With this, a client needs to subscribe to these events only at this node. The different events are described in 8.2 and 8.3.

8.2 JobGroupType

This ObjectType represent a job group.

Table 15 – JobGroupType Definition

Attribute	Value
BrowseName	JobGroupType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseObjectType defined in OPC 10000-5
0:HasProperty	Variable	0:NodeVersion	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	Id	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	Description	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	EquipmentDescription	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	ProductionDatasetName	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	MaterialMapping	MaterialMappingType[]	0:PropertyType	M, RO
0:HasProperty	Variable	ConfigurationParameters	ConfigurationParameterType[]	0:PropertyType	M, RO
0:HasProperty	Variable	Priority	0:UInt32	0:PropertyType	M, RO
0:HasProperty	Variable	PlannedStart	0:UtcTime	0:PropertyType	M, RO
0:HasProperty	Variable	PlannedProductionTime	0:Duration	0:PropertyType	M, RO
0:HasProperty	Variable	PlannedSetUpTime	0:Duration	0:PropertyType	M, RO
0:HasProperty	Variable	LatestEnd	0:UtcTime	0:PropertyType	M, RO
0:HasProperty	Variable	Status	3:JobStatusEnumeration	0:PropertyType	M, RO
0:HasComponent	Variable	ElectricalEnergyConsumption	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	FluidEnergyConsumption	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	PressureAirConsumption	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Object	Job_<Nr>		JobType	OP
0:HasComponent	Method	AddJob			O
0:HasComponent	Method	RemoveJobById			O
0:HasComponent	Method	StartJobById			O
0:HasComponent	Method	InterruptJobById			O
0:HasComponent	Method	FinishJobById			O
0:GeneratesEvent	ObjectType	0:GeneralModelChangeEventType
Conformance Units
OPC 40084-2 Jobs

8.2.1 NodeVersion

The NodeVersion Property as defined in OPC 10000-3 is used to inform the client about model changes. Here it informs about added or removed instances of JobType in the group.

8.2.2 Id

Id of the job group.

8.2.3 Description

Description of the job group.

8.2.4 EquipmentDescription

Description of the equipment needed for job. This is only for information (e.g. for operator)

NOTE: It makes sense only to mention the interchangeable equipment of the extrusion line here (e.g. die, screw).

8.2.5 ProductionDatasetName

Name of the production dataset which is needed for the job.

8.2.6 MaterialMapping

Information, which material is needed for the production. The MaterialMappingType is defined in Table 16.

Table 16 – MaterialMappingType Definition

Name	Type	Description
MaterialMappingType	structure
MaterialId	String	Id of the material as specified in the MaterialList (see 6.8)
MaterialLot	String	Lot of the material (empty string allowed if not relevant)
HopperId	String	Id of the hopper in which the material shall be put (empty string allowed if not supported)

8.2.7 Priority

Priority of the job group: 1 = highest priority, higher values represent lower priorities.

8.2.8 PlannedStart

Planned start of the job (in UTC time). If not relevant the value shall be 0.

8.2.9 PlannedProductionTime

Planned time for the production of the job group. If not relevant the value shall be 0.

8.2.10 PlannedSetUpTime

Planned total time needed for set up and tear down of the extrusion line for the job group. If not relevant the value shall be 0.

8.2.11 LatestEnd

Latest end of the job (in UTC time). If not relevant the value shall be 0.

8.2.12 ConfigurationParameters

Array of offered configuration parameters. The ConfigurationParameterType is defined in OPC 40083. Which ConfigurationParameters are offered to the jobs in the group depends on the machine / implementation / production dataset.

8.2.13 Status

Status of the job group. The JobStatusEnumeration is defined in OPC 40083.

8.2.14 ElectricalEnergyConsumption

Cumulated electrical energy consumption of the extrusion line for the job group in kWh.

8.2.15 FluidEnergyConsumption

Cumulated energy for the cooling of the whole extrusion line with fluid for the job group in kWh.

8.2.16 PressureAirConsumption

Cumulated consumption of pressure air of the whole extrusion line (volume at standard conditions) for the job group in kWh.

8.2.17 Job_<Nr>

This is a placeholder for the jobs inside the group (see 8.3). When instances are created the BrowseNames shall be “Job_<Nr>” where <Nr> is a three-digit number with leading zeros, starting with “001”.

8.2.18 AddJob

This method adds a new job to the group with the needed Properties.

Signature

AddJob (

[in]0:StringId

[in]0:StringDescription

[in]0:StringCustomerName

[in]0:StringProductName

[in]0:StringProductDescription

[in]0:UInt32Strand

[in]0:UInt32Sequence

[in]3:ParameterSettingType[]ParameterSetting

[in]0:DoubleSetOutput

[in]0:DoubleLotSize

[out]0:NodeIdJobNodeId);

Table 17 – AddJob Method Arguments

Argument	Description
Id	See 8.3, where the Properties of a job are defined.
Description	See 8.3, where the Properties of a job are defined.
CustomerName	See 8.3, where the Properties of a job are defined.
ProductName	See 8.3, where the Properties of a job are defined.
ProductDescription	See 8.3, where the Properties of a job are defined.
Strand	See 8.3, where the Properties of a job are defined.
Sequence	See 8.3, where the Properties of a job are defined.
ParameterSetting	See 8.3, where the Properties of a job are defined.
SetOutput	See 8.3, where the Properties of a job are defined.
LotSize	See 8.3, where the Properties of a job are defined.
JobNodeId	The method returns the NodeId of the created instance for the job group

Table 18 – AddJob Method AddressSpace Definition

Attribute	Value
BrowseName	AddJob
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory
0:HasProperty	Variable	0:OutputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.2.19 RemoveJobById

This method removes a job from a group.

Signature

RemoveJobById (

[in]0:StringId);

Table 19 – RemoveJobById Method Arguments

Argument	Description
Id	Id of the job that shall be removed

Table 20 – RemoveJobById Method AddressSpace Definition

Attribute	Value
BrowseName	RemoveJobById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.2.20 StartJobById

With this method the client requests to start the production of a specific job in the group.

Signature

StartJobById (

[in]0:StringId);

Table 21 – StartJobById Method Arguments

Argument	Description
Id	Id of the job that shall be started

Table 22 – StartJob Method AddressSpace Definition

Attribute	Value
BrowseName	StartJobById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.2.21 InterruptJobById

With this method the client requests to interrupt the production of a specific job.

Signature

InterruptJobById (

[in]0:StringId);

Table 23 – InterruptJobById Method Arguments

Argument	Description
Id	Id of the job that shall be interrupted

Table 24 – InterruptJobById Method AddressSpace Definition

Attribute	Value
BrowseName	InterruptJobById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

To continue the production of the job, StartJobById is called.

8.2.22 FinishJobById

With this method the client requests to finish the production of a specific job.

Signature

FinishJobById (

[in]0:StringId);

Table 25 – FinishJobById Method Arguments

Argument	Description
Id	Id of the job that shall be finished.

Table 26 – FinishJobById Method AddressSpace Definition

Attribute	Value
BrowseName	FinishJobById
References	Node Class	BrowseName	DataType	TypeDefinition	Modelling Rule
0:HasProperty	Variable	0:InputArguments	0:Argument[]	0:PropertyType	0:Mandatory

8.2.23 JobGroupStatusChangedEventType

This EventType is used to inform the client about the change of the Status Property of a job group. It is fired by the parent JobGroups object to have only one Node for the subscription.

Table 27 – JobGroupStatusChangedEventType Definition

Attribute	Value
BrowseName	JobGroupStatusChangedEventType
IsAbstract	True
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseEventType defined in OPC 10000-5
0:HasProperty	Variable	Id	0:String	0:PropertyType	M
0:HasProperty	Variable	LastStatus	3:JobStatusEnumeration	0:PropertyType	M
0:HasProperty	Variable	ActiveStatus	3:JobStatusEnumeration	0:PropertyType	M
Conformance Units
OPC 40084-2 Jobs

Id: Id of the job group.

LastStatus:Value of the Status Property of the job group before the change

ActiveStatus:Value of the Status Property of the job group after the change

The SourceNode (part of BaseEventType) shall be the NodeId of the relevant job group.

8.3 JobType

This ObjectType represent a single job inside a job group.

Table 28 – JobType Definition

Attribute	Value
BrowseName	JobType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseObjectType defined in OPC 10000-5
0:HasProperty	Variable	Id	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	Description	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	CustomerName	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	ProductId	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	ProductDescription	0:String	0:PropertyType	M, RO
0:HasProperty	Variable	Strand	0:UInt32	0:PropertyType	M, RO
0:HasProperty	Variable	Sequence	0:UInt32	0:PropertyType	M, RO
0:HasProperty	Variable	ParameterSetting	ParameterSettingType[]	0:PropertyType	M, RO
0:HasProperty	Variable	SetOutput	0:Double	0:PropertyType	M, RO
0:HasProperty	Variable	LotSize	0:Double	0:PropertyType	M, RO
0:HasProperty	Variable	Status	3:JobStatusEnumeration	0:PropertyType	M, RO
0:HasComponent	Variable	GoodProduct	0:Boolean	0:BaseDataVariableType	M, RO
0:HasComponent	Variable	Throughput	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	ProductWeight	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	LineSpeed	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	ActualLot	0:UInt32	0:BaseDataVariableType	M, RO
0:HasComponent	Variable	ActualLotName	0:String	0:BaseDataVariableType	O, RW
0:HasComponent	Variable	ActualOutput	0:Double	0:BaseDataVariableType	M, RO
0:HasComponent	Variable	ActualGoodOutput	0:Double	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	ActualBadOutput	0:Double	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	ActualSampleOutput	0:Double	0:BaseDataVariableType	O, RO
0:HasComponent	Variable	ActualOutputRate	0:Double	0:BaseDataVariableType	M, RO
Conformance Units
OPC 40084-2 Jobs

8.3.1 Id

Id of the job. It shall be unique inside the relevant job group. Two jobs inside different job groups may have the same Id.

8.3.2 Description

Description of the job.

8.3.3 CustomerName

Name of the customer for that the job is produced.

8.3.4 ProductId

Id of the product produced by the job.

8.3.5 ProductDescription

Description of the product produced by the job.

8.3.6 Strand

Strand is used when several products (two pipes is parallel, foil cut into several smaller foils) are produced in parallel. When only one product is produced at the same time, the value is always 1.

8.3.7 Sequence

Planned sequence when the job group contains multiple job for one strand. When there is only one job for a string in the production group the value is always 1.

8.3.8 ParameterSetting

Array for the configuration of the job by setting values for the offered configuration parameters. The ParameterSettingType is defined in OPC 40083. If an entry in the ConfigurationParameters Array in the job group has no corresponding entry in the ParameterSetting Array, the default value is used.

8.3.9 SetOutput

Set output of the job. The output is always counted in units, where a unit can be a piece of pipe/profile, roll of film, bag of compound, but also a defined bundle (e.g. one unit consist of 4 bags). What a unit is, may be configurable by the configuration parameters.

8.3.10 LotSize

Size of a production lot. This used to control the

frequency of the Events of LotFinishedEventType (see 8.3.19)
production of different jobs in a group: When LotSize is reached, the next job in the group is produced (see examples in Annex).

8.3.11 Status

Status of the job. The JobStatusEnumeration is defined in OPC 40083.

8.3.12 GoodProduct

Indication if the produced product has a good quality. Can be set by the machine or the operator. When it changes from true to false the line control shall create an alarm.

8.3.13 ActualLot

Which lot (number) is currently in production.

8.3.14 ActualLotName

Optional name for the actual lot.

8.3.15 ActualOutput, ActualGoodOutput, ActualBadOutput, ActualSampleOutput

These Variables represent the total number of produced (finished) units and the numbers of good, bad and test sample units in the current job. (See explanation above for unit in SetOutput.)

8.3.16 ActualOutputRate

Average output rate of the job in units per hour.

8.3.17 JobStatusChangedEventType

This EventType is used to inform the client about the change of the Status Property of a job. It is fired by the JobGroups object to have only one Node for the subscription.

Table 29 – JobStatusChangedEventType Definition

Attribute	Value
BrowseName	JobStatusChangedEventType
IsAbstract	True
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseEventType defined in OPC 10000-5
0:HasProperty	Variable	JobGroupId	0:String	0:PropertyType	M
0:HasProperty	Variable	JobId	0:String	0:PropertyType	M
0:HasProperty	Variable	LastStatus	3:JobStatusEnumeration	0:PropertyType	M
0:HasProperty	Variable	ActiveStatus	3:JobStatusEnumeration	0:PropertyType	M
Conformance Units
OPC 40084-2 Jobs

JobGroupId: Id of the job group.

JobId: Id of the job.

LastStatus:Value of the Status Property of the job group before the change

ActiveStatus:Value of the Status Property of the job group after the change

The SourceNode (part of BaseEventType) shall be the NodeId of the relevant job.

8.3.18 UnitFinishedEventType

This EventType is used to inform the client a finished product unit. It is fired by the parent JobGroups object to have only one Node for the subscription.

Table 30 – UnitFinishedEventType Definition

Attribute	Value
BrowseName	UnitFinishedEventType
IsAbstract	True
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseEventType defined in OPC 10000-5
0:HasProperty	Variable	JobGroupId	0:String	0:PropertyType	M
0:HasProperty	Variable	JobId	0:String	0:PropertyType	M
0:HasProperty	Variable	Unit	0:UInt32	0:PropertyType	M
0:HasProperty	Variable	GoodProduct	0:Boolean	0:PropertyType	M
Conformance Units
OPC 40084-2 Jobs

JobGroupId: Id of the job group.

JobId: Id of the job.

Unit:Counter, which unit out of the total amount has been finished.(e.g. roll number 4 roll is finished)

GoodProduct:Information if the finished unit has a good quality.

The SourceNode (part of BaseEventType) shall be the NodeId of the relevant job.

8.3.19 LotFinishedEventType

This EventType is used to inform the client a finished production lot. It is fired by the parent JobGroups object to have only one Node for the subscription.

Table 31 – LotFinishedEventType Definition

Attribute	Value
BrowseName	LotFinishedEventType
IsAbstract	True
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseEventType defined in OPC 10000-5
0:HasProperty	Variable	JobGroupId	0:String	0:PropertyType	M
0:HasProperty	Variable	JobId	0:String	0:PropertyType	M
0:HasProperty	Variable	Lot	0:UInt32	0:PropertyType	M
Conformance Units
OPC 40084-2 Jobs

JobGroupId: Id of the job group.

JobId: Id of the job.

Lot:Counter, which lot has been finished. (e.g. lot number 6 roll is finished)

The SourceNode (part of BaseEventType) shall be the NodeId of the relevant job.

NOTE: The three events JobStatusChanged, UnitFinished and LotFinished may be fired simultaneously. E.g. when a job is finished, then the status is changed, the last product is finished as well as the last lot. If the job is the last in the job group, the JobGroupStatusChanges event will be fired in addition. However, the client decides which EventTypes are subscribed.