The ProductionParametersType contains several production parameters which are related to the complete extrusion line. Process parameters of the components (e.g. core extruder, winder) are located inside the models for these components.

Table 3 – ProductionParametersType Definition

Attribute	Value
BrowseName	ProductionParametersType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseObjectType defined in OPC 10000-5
0:HasComponent	Variable	GoodProduct	0:Boolean	0:BaseDataVariableType	M, RO
0:HasComponent	Variable	Throughput	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	ProductWeight	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Variable	LineSpeed	0:Double	0:AnalogUnitType	O, RO
0:HasComponent	Object	ElectricalEnergy		3:EnergyType	O, RO
0:HasComponent	Object	FluidEnergy		3:EnergyType	O, RO
0:HasComponent	Object	PressureAir		3:EnergyType	O, RO
Conformance Units
OPC 40084-2 Basic

Indication if the produced product has a good quality. Can be set by the machine or the operator. When it changes from true to false the line control shall create an alarm.

This Property gives the general information on the complete extrusion line. The JobType (see 8.3) contains also a Property GoodProduct which is specific for the running job. When two or more jobs are running in parallel, the product quality of each strand can be different. That means, if in one of the jobs GoodProduct becomes False, then the GoodProduct in ProductionParameters shall also be false.

Throughput of the extrusion line in mass per time (e.g. kg/h).

Weight of the produced product in mass per length or volume (e.g. g/m, kg/m³).

Production speed of the line in length per time (e.g. m/s).

Electrical energy of the extrusion line. The EnergyType is defined in OPC 40083.

Energy for the cooling of the whole extrusion line with fluid. The EnergyType is defined in OPC 40083.

Consumption of pressure air of the whole extrusion line (volume at standard conditions). The EnergyType is defined in OPC 40083.