This OPC UA ObjectType is used for the root Object representing a corrugator as part of an extrusion line. It is based on the HaulOff_InterfaceType (defined in OPC 40084-4) and formally defined in Table 1.

The instance(s) of Corrugator_InterfaceType shall be located under the DeviceSet Object of the Server (see OPC UA Part 100).

NOTE: If the OPC UA server is implemented in the control of the corrugator so only one instance of Corrugator_InterfaceType will be created. But it is also possible that one OPC UA server is connected to several machine controls as one interface to the MES. In this case several instances of Corrugator_InterfaceType will be created.

Figure 1 – Corrugator_InterfaceType Overview

Table 1 – Corrugator_InterfaceType Definition

Attribute	Value
BrowseName	Corrugator_InterfaceType
IsAbstract	False
References	Node Class	BrowseName	DataType	TypeDefinition	Other
Subtype of 5:HaulOff_InterfaceType (defined in OPC 40084-4)
0:HasComponent	Variable	ExtruderEnabled	0:Boolean	0:BaseDataVariableType	M, RO
0:HasProperty	Variable	MouldId	0:String	0:PropertyType	M, RO

The BrowseName of the object instance shall be "Corrugator_<Manufacturer>_<SerialNumber>"

Example: "Corrugator_Unicor_0123456".