The StandbyModeTransitionDataType holds information which might change when the device is in a transition state to an Energy Saving Mode.
Table 39 – StandbyModeTransitionDataType Structure
|
Name |
Type |
Description |
|
StandbyModeTransitionDataType |
Structure |
|
|
IDDestination |
0:Byte |
Mode ID of destination Energy Saving Mode. |
|
CurrentTimeToDestination |
0:Duration |
Time needed to reach the mode IDDestination. Shall be a “Worst case” value if ongoing (dynamic) time value is not supported. Shall be 0 if destination Energy Saving Mode is reached. |
|
CurrentTimeToOperate |
0:Duration |
Time needed to reach „Ready to operate“ if the Energy Saving Mode is not regularly terminated. The server might update the value after reaching the destination state as long as the TimeMinLengthOfStay of the destination state is not reached. |
|
EnergyConsumptionToDestination |
0:Float |
Energy consumption for actual transition. Shall be 0 if not in a transition state. |
Its representation in the AddressSpace is defined in Table 40.
Table 40 – StandbyModeTransitionDataType Definition
|
Attribute |
Value |
|||||
|
BrowseName |
StandbyModeTransitionDataType |
|||||
|
IsAbstract |
False |
|||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Other |
|
|
Subtype of the Structure type defined in [OPC 10000-3] |
||||||
Figure 12 shows how CurrentTimeToOperate varies in dependence of TimeToPause and TimeMinLengthOfStay of the destination Energy Saving Mode during and immediately after the transition.
The relationship of RegularTimeToOperate and CurrentTimeToOperate during a mode transition shall follow the specification defined by PROFIenergy (See [PE CAP], figure 14).
xxxx
