Process Automation Devices - PADIM - 7.1.24 IAmperometricSignalConditionSetType

7.1.24 IAmperometricSignalConditionSetType

The IAmperometricSignalConditionSetType provides the interface to amperometric measurement signal specific condition variables and is formally defined in Table 82.

Table 82 – IAmperometricSignalConditionSetType definition

Attribute	Value
BrowseName	IAmperometricSignalConditionSetType
IsAbstract	True
References	NodeClass	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseInterfaceType defined in OPC 10000-5, i.e. inheriting the InstanceDeclarations of that Node
0:HasComponent	Variable	SensingElementTemperature	0:Float	0:AnalogUnitType	O
0:HasComponent	Variable	SensorNextCalibration	0:UInt32	0:AnalogUnitType	O
0:HasProperty	Variable	SensorCleaningsCounter	0:UInt32	0:PropertyType	O
0:HasProperty	Variable	SensorSterilisationsCounter	0:UInt32	0:PropertyType	O
Conformance Units
PA-DIM AmperometricSignalType
PA-DIM AmperometricSignalType SensorNextCalibration
PA-DIM AmperometricSignalType SensorCleaningsCounter
PA-DIM AmperometricSignalType SensorSterilisationsCounter

SensingElementTemperature is defined by IRDI as ABP565#001 which states “temperature measured at a sensing element”.

SensorNextCalibration is defined by IRDI as ABP566#001 which states “time that can elapse until the next calibration, calculated from the configured calibration interval or estimated by the device”.

SensorCleaningsCounter is defined by IRDI as ABP546#001 which states “number of times a sensor has been cleaned in place”.

SensorSterilisationsCounter is defined by IRDI as ABP547#001 which states “number of times a sensor has been sterilized in place”.

The components of IAmperometricSignalConditionSetType have additional references which are defined in Table 83.

Table 83 – IAmperometricSignalConditionSetType additional References

SourceBrowsePath

Reference Type

Is Forward

TargetBrowsePath

SensingElementTemperature

0:HasDictionaryEntry

True

3:0112/2///61987#ABP565#001