Process Automation Devices - PADIM - 7.1.5 IAmperometricCalibrationType

7.1.5 IAmperometricCalibrationType

The IAmperometricCalibrationType provides the interface to amperometric measurement specific calibration variables of the sensor resp. signal and is formally defined in Table 26.

Table 26 – IAmperometricCalibrationType definition

Attribute	Value
BrowseName	IAmperometricCalibrationType
IsAbstract	True
References	NodeClass	BrowseName	DataType	TypeDefinition	Other
Subtype of 0:BaseInterfaceType defined in OPC 10000-5, i.e. inheriting the InstanceDeclarations of that Node
0:HasComponent	Variable	AmperometricSensorSlope	0:Float	0:AnalogUnitType	O
0:HasComponent	Variable	AmperometricSensorZeroPoint	0:Float	0:AnalogUnitType	O
0:HasComponent	Variable	AbsoluteAirPressure	0:Float	0:AnalogUnitType	O
0:HasProperty	Variable	SensorT90	0:Float	0:PropertyType	O
Conformance Units
PA-DIM AmperometricSignalType
PA-DIM IAmperometricCalibration AbsoluteAirPressure
PA-DIM IAmperometricCalibration SensorT90

AmperometricSensorSlope is defined by IRDI as ABP572#001 which states “slope of an amperometric sensing element characteristic determined by the last calibration”.

AmperometricSensorZeroPoint is defined by IRDI as ABP573#001 which states “zero point of an amperometric sensing element characteristic determined by the last calibration”.

AbsoluteAirPressure is defined by IRDI as ABP574#001 which states “absolute air pressure under which the last calibration was performed”.

SensorT90 is defined by IRDI as ABP569#001 which states “t90 settling time determined by the last calibration”.

The components of IAmperometricCalibrationType have additional references which are defined in Table 27.

Table 27 – IAmperometricCalibrationType additional References

SourceBrowsePath

Reference Type

Is Forward

TargetBrowsePath

AmperometricSensorSlope

0:HasDictionaryEntry

True

3:0112/2///61987#ABP572#001