The IThermalConductivitySignalConditionSetType provides the interface to thermal conductivity measurement signal specific condition variables and is formally defined in Table 52.
Table 52 – IThermalConductivitySignalConditionSetType definition
|
Attribute |
Value |
||||
|
BrowseName |
IThermalConductivitySignalConditionSetType |
||||
|
IsAbstract |
True |
||||
|
References |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of 0:BaseInterfaceType defined in OPC 10000-5, i.e. inheriting the InstanceDeclarations of that Node |
|||||
|
0:HasComponent |
Variable |
SampleTemperature |
0:Float |
0:AnalogUnitType |
O |
|
Conformance Units |
|||||
|
PA-DIM ThermalConductivitySignalType |
|||||
SampleTemperature is defined by IRDI as ABP575#001 which states “temperature of the sample at the point of measurement”.
The components of IThermalConductivitySignalConditionSetType have additional references which are defined in Table 53.
Table 53 – IThermalConductivitySignalConditionSetType additional References
|
SourceBrowsePath |
Reference Type |
Is Forward |
TargetBrowsePath |
||
|
SampleTemperature |
0:HasDictionaryEntry |
True |
3:0112/2///61987#ABP575#001 |
||
|
0:HasDictionaryEntry |
True |
The child Nodes of the IThermalConductivitySignalConditionSetType have additional Attribute values defined in Table 54.
Table 54 – IThermalConductivitySignalConditionSetType Attribute values for child Nodes
|
BrowsePath |
Value Attribute |
||
|
SampleTemperature |
0.0 |
||
|
NamespaceUri: http://www.opcfoundation.org/UA/units/un/cefactUnitId: 4408652DisplayName: °CDescription: degree Celsius |