This enumeration shows the state of a channel in a numerical control (NC).

The enumeration is defined in Table 100.

Table 100 – ChannelState EnumValues Fields

Name

Value

Description

Active

0

There is an active command being executed by the NC channel.

Interrupted

1

The NC execution is interrupted. Execution of a program in the channel can be restarted.

Reset

2

No NC command is active in the NC channel. E.g., channel is idle.

Its representation in the AddressSpace is defined in Table 101.

Table 101 – ChannelState Definition

Attribute

Value

BrowseName

ChannelState

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Monitoring Basic – Channels

This enumeration describes possible operation modes of a NC channel.

The enumeration is defined in Table 102.

Table 102 – ChannelMode EnumValues Fields

Name

Value

Description

Automatic

0

NC channel mode Automatic – execute CNC part programs.

MdaMdi

1

NC channel mode Mda/Mdi – manual data input and execution.

JogManual

2

NC channel mode Jog Manual – axis movement triggered by user.

JogIncrement

3

NC channel mode Jog Increment – incremental axis movement triggered by user.

TeachingHandle

4

NC channel mode Teaching Handle – teaching a machine tool by moving axes of the machine tool by hand.

Remote

5

NC channel mode Remote – the machine tool can receive CNC files via a remote access mechanism.

Reference

6

NC channel mode Reference – The machine tool returns to its reference point/ zero position.

Other

7

NC channel mode is different from the values defined in this enumeration.

Its representation in the AddressSpace is defined in Table 103.

Table 103 – ChannelMode Definition

Attribute

Value

BrowseName

ChannelMode

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Monitoring Basic – Channels

This enumeration contains possible states of the EDM spark generator.

The enumeration is defined in Table 104.

Table 104 – EDMGeneratorState EnumValues Fields

Name

Value

Description

Undefined

0

The EDM spark generator state cannot be indicated.

Ready

1

Generator is initialized and can receive a set of technology parameters.

Active_Low_Voltage

2

Generator is switched on and is supplying pulses respecting the low voltage (≤ 25 V AC or ≤ 60 V DC) requirements of safety standard (ISO 28881).

Active_High_Voltage

3

Generator is switched on and is supplying pulse at high voltage (> 25 V AC or > 60 V DC).

Error

4

Generator is in an error state.

Its representation in the AddressSpace is defined in Table 105.

Table 105 – EDMGeneratorState Definition

Attribute

Value

BrowseName

EDMGeneratorState

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Monitoring WorkingUnit

This enumeration indicates the state of a laser device.

The enumeration is defined in Table 106.

Table 106 – LaserState EnumValues Fields

Name

Value

Description

Undefined

0

The laser state cannot be indicated, for example because the device does not provide this information or because it is currently unavailable. This can be e.g., during the startup phase.

Ready

1

The laser is ready and laser programs can be started. No error state is active. In this state, laser emission is prohibited.

Active

2

In this state, safety clearances have to be set for processing and emission can be activated. For devices that can run programs themselves it indicates that a program is running on the laser device.

Error

3

An error state is reported from the laser device.

Its representation in the AddressSpace is defined in Table 107.

Table 107 – LaserState Definition

Attribute

Value

BrowseName

LaserState

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Monitoring WorkingUnit

This enumeration contains possible operation modes for the machine. The values of the MachineOperationMode enum are derived from the MO modes of machinery functional safety standards. The values of the MachineOperationMode only represent the machine status and shall not be used in a safety relevant manner.

The enumeration is defined in Table 108.

Table 108 – MachineOperationMode EnumValues Fields

Name

Value

Description

Manual

0

The machine tool is controlled manually, by the operator. Depending on technology specific norms, the maximum axis movement speeds of the machine tool are limited.

Automatic

1

Operating mode for the automatic, programmed and continuous operation of the machine. Manual loading and unloading workpieces are possible when the automatic program is stopped. Axis movement speeds are fully available to the machine tool’s ability.

Setup

2

Depending on technology specific norms, the maximum axis movement speeds of the machine tool are limited. In this mode, the operator can make settings for the subsequent work processes.

AutoWithManualIntervention

3

Operating mode with the possibility of manual interventions in the machining process as well as limited automatic operation started by the operator. Depending on technology specific norms, the maximum axis movement speeds of the machine tool are limited.

Service

4

Operating mode for service purposes. This mode shall not be used for manufacturing any parts. This mode shall only be used by authorized personnel.

Other

5

The machine operation mode is different from the values defined in this enumeration.

Its representation in the AddressSpace is defined in Table 109.

Table 109 – MachineOperationMode Definition

Attribute

Value

BrowseName

MachineOperationMode

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool MachineToolType Mandatory Nodes

[DEPRECATED in version 1.02]

This enumeration provides possible values for the quality of a part. The value represents the quality for the production process step(s) in the machine, not the quality of possible previous production steps.

The enumeration is defined in Table 110.

Table 110 – PartQuality EnumValues Fields

Name

Value

Description

CapabilityUnavailable

0

The machine tool is not able to give a statement about the part quality.

Good

1

The part quality is determined good.

Bad

2

The part quality is determined bad.

NotYetMeasured

3

The PartQuality will still be determined in the machine tool to be either Good or Bad.

WillNotBeMeasured

4

The machine tool will not give a statement about the part quality.

Its representation in the AddressSpace is defined in Table 111.

Table 111 – PartQuality Definition

Attribute

Value

BrowseName

PartQuality

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Production Job

[DEPRECATED in version 1.02]

This enumeration contains the possible values for indication if an irregularity in the production process can be detected and if it is detected.

The enumeration is defined in Table 112.

Table 112 – ProcessIrregularity EnumValues Fields

Name

Value

Description

CapabilityUnavailable

0

The machine tool is not able to give a statement about process irregularities.

Detected

1

A process irregularity has been detected.

NotDetected

2

There was no process irregularity detected.

NotYetDetermined

3

A statement about the process irregularity is to be expected.

Its representation in the AddressSpace is defined in Table 113.

Table 113 – ProcessIrregularity Definition

Attribute

Value

BrowseName

ProcessIrregularity

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Production Job

Tool life is the state of decay/ usage of a tool. The tool life can be measured in usage e.g., number of times the tool has been changed into the spindle, minutes of run time or deviation of a defined geometry.

This enumeration contains the values to indicate the subject of tool life measurement.

The enumeration is defined in Table 114.

Table 114 – ToolLifeIndication EnumValues Fields

Name

Value

Description

Time

0

The tool life indicates the time the tool has been in use or can still be used. The value shall be given in hours (decimal value).

NumberOfParts

1

The tool life indicates the total number of parts that have been produced or can still be produced using the tool. The unit shall be “one”.

NumberOfUsages

2

The tool life indicates counting the process steps this tool has been used or can still be used (for example usages of a punching tool). The unit shall be “one”.

Feed_Distance

3

The tool life indicates the sum of the feed path covered by the tool and the workpiece relative to each other during machining. This value shall be given in one of the following units: millimetres, metres, kilometres.

Cutting_Distance

4

The tool life indicates the sum of the lengths that the cutting knife works in the workpiece. If the knife is not fixed, this includes the lengths of the arc segments of the knife path. This value shall be given in one of the following units: millimetres, metres, kilometres. This value is likely only available for serial production with clearly defined machining conditions.

Length

5

The tool life indicates the abraded length of the tool. This value shall be given in one of the following units: micrometres, millimetres, metres, kilometres.

Diameter

6

The tool life indicates the abraded diameter of the tool. This value shall be given in one of the following units: micrometres, millimetres, metres, kilometres.

Other

7

The tool life is indicated in a way not covered by the remaining enum values.

Its representation in the AddressSpace is defined in Table 115.

Table 115 – ToolLifeIndication Definition

Attribute

Value

BrowseName

ToolLifeIndication

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Equipment ToolLife

This enumeration provides the values to indicate for what reason a tool is locked.

The enumeration is defined in Table 116.

Table 116 – ToolLocked EnumValues Fields

Name

Value

Description

CapabilityUnavailable

0

The reason for locking the tool cannot be given.

ByOperator

1

The tool is locked by an operator.

ToolBreak

2

The tool is locked because a tool break has been detected.

ToolLife

3

The tool is locked because it reached a tool life limit.

MeasurementError

4

The tool is locked due to a measurement error of the tool.

Other

5

The tool is locked for another reason.

Its representation in the AddressSpace is defined in Table 117.

Table 117 – ToolLocked Definition

Attribute

Value

BrowseName

ToolLocked

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Equipment ToolIdentification

MachineTool Equipment Dynamic Tool List

This enumeration contains the values to indicate how a tool is addressed by a control/controller.

The enumeration is defined in Table 118.

Table 118 – ToolManagement EnumValues Fields

Name

Value

Description

NumberBased

0

The tool is addressed using a single identifier.

GroupBased

1

The tool is addressed using an identifier for the group and a second one for the tool within the group.

Other

2

The tool is addressed by a different, custom defined system.

Its representation in the AddressSpace is defined in Table 119.

Table 119 – ToolManagement Definition

Attribute

Value

BrowseName

ToolManagement

IsAbstract

False

References

NodeClass

BrowseName

DataType

TypeDefinition

Other

Subtype of the 0:Enumeration type defined in OPC 10000-3

0:HasProperty

Variable

0:EnumValues

0:EnumValueType []

0:PropertyType

Conformance Units

MachineTool Equipment ToolIdentification

MachineTool Equipment Dynamic Tool List