The ChannelMonitoringTypeprovides the monitoring information about one NC channel.
The ChannelMonitoringTypeis formally defined in Table 22.
Table 22– ChannelMonitoringType Definition
Attribute |
Value |
||||
BrowseName |
ChannelMonitoringType |
||||
IsAbstract |
False |
||||
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
Subtype of the ElementMonitoringTypedefined in 8.3.2i.e. inheriting the InstanceDeclarations of that Node. |
|||||
0:HasComponent |
Variable |
ChannelState |
ChannelState |
0:BaseDataVariableType |
M, RO |
0:HasComponent |
Variable |
ChannelMode |
ChannelMode |
0:BaseDataVariableType |
M, RO |
0:HasComponent |
Variable |
FeedOverride |
0:Double |
0:AnalogUnitRangeType |
M, RO |
0:HasComponent |
Variable |
RapidOverride |
0:Double |
0:AnalogUnitRangeType |
O, RO |
0:HasComponent |
Object |
ChannelModifiers |
|
ChannelModifierType |
O |
Conformance Units |
|||||
MachineTool Monitoring Basic - Channels |
ChannelStateis representing the current status of the NC channel and is defined in 12.1.
ChannelModeis representing the current mode the NC channel operates in. It is defined in 12.2.
FeedOverrideis representing the current value of the feed override of the NC channel.
RapidOverrideis representing the current value of the rapid override of the NC channel.
ChannelModifiersis representing additional program modifiers usually used during special operations of the machine tool, e.g. preparation of production (see 8.3.10).