This method executes the SystemCommand 0x01.

Signature

ParamUploadFromDeviceStart (

[out]UInt16 ErrorType,

[out]Int32 Status

);

Argument

Description

ErrorType

Hex Values converted to UInt16 returned as ErrorType in case the operation was not successful. Data needs to be interpreted according to the IO-Link Specification. 0 if the operation was successful.

Note that in case the device supports no ISDUs and the SystemCommand is triggered via writing Parameter Page 1, no indication of a positive or negative response is provided and the ErrorType is always a 0.

Status

Returns the status of the operation.

0: OK, operation successful

-1: Operation already running, either by same or different ISDU read or write

-2: Device not active, either device not connected, not in operation mode or port is configured not to be in IO-Link mode

-3: Operation executed but error code returned from device, details are provided in ErrorType