Table 35 – ISensorType Definition
|
Attribute |
Value |
||||
|
BrowseName |
ISensorType |
||||
|
IsAbstract |
True |
||||
|
References |
Node Class |
BrowseName |
DataType |
TypeDefinition |
Other |
|
Subtype of the IJoiningSystemAssetType, inheriting the InstanceDeclarations of that Node. |
|||||
|
0:HasComponent |
Object |
Parameters |
-- |
0:FolderType |
M |
|
Conformance Units |
|||||
|
IJT Asset Management Sensor |
|||||
|
|
|||||
The components of the ISensorType have additional subcomponents which are defined in Table 36.
Table 36 – ISensorType Additional Subcomponents
|
Source Path |
Reference |
NodeClass |
BrowseName |
DataType |
TypeDefinition |
Others |
|
Parameters |
0:HasComponent |
Variable |
Type |
0:Byte |
0:MultiStateDiscreteType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
OverloadCount |
0:Int64 |
0:BaseDataVariableType |
O, RO |
|
Parameters |
0:HasComponent |
Variable |
MeasuredValue |
0:Double |
JoiningDataVariableType |
O, RO |
|
|
|
|
|
|
|
|
Type is the classification of a Sensor. In Table 37, standardized values for the EnumStrings are defined. Each instance of this type shall follow the defined sequence for the entries.
Note: Servers can add additional entries into the EnumStrings array and may provide translations of the texts in different locales.
Table 37 – ISensorType Attribute values for child nodes
|
BrowsePath |
Value Attribute |
|||
|
OTHER TIME TORQUE ANGLE IMPULSE DISTANCE AREA VOLUME FORCE PRESSURE VOLTAGE CURRENT RESISTANCE POWER ENERGY MASS TEMPERATURE FREQUENCY JOLT VIBRATION NUMBER LINEAR_SPEED ANGULAR_SPEED LINEAR_ACCELERATION ANGULAR_ACCELERATION TORQUE_SPEED TORQUE_ACCELERATION |
OverloadCount is the number of overloads of the sensor, where the permissible load of the senor was exceeded.
MeasuredValue is the actual measured value reported from a sensor.
Note: An instance of Sensor can be referenced to a respective Calibration Target which was used to calibrate the sensor. The standard models for Calibration Target are defined in OPC 10000-200.