Geometric Measuring Systems - 11 OPC UA DataTypes

This structure contains all information about a Workspace. This Structure is an abstract DataType and further divides into the subtypes of Cartesian and Cylindrical workspaces.

Its representation in the AddressSpace is defined in Table 43.

Table 43 – WorkspaceType Definition

Attribute		Value
BrowseName		WorkspaceType
IsAbstract		True
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the Structure defined in OPC 10000-3
Conformance Units
GMS GMSIdentificationType

11.2 CartesianWorkspaceType

This structure contains the information of a Cartesian Workspace. The structure is defined in Table 44.

Table 44 – CartesianWorkspaceType Structure

Name	Type	Description
CartesianWorkspaceType	structure	Subtype of WorkspaceType defined in this Companion Specification
Length	0:Double	in direction of global gravity
Width	0:Double	An orthogonal direction to height and length
Height	0:Double	An orthogonal direction to width and length

Its representation in the AddressSpace is defined in Table 45.

Table 45 – CartesianWorkspaceType Definition

Attribute		Value
BrowseName		CartesianWorkspaceType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the WorkspaceType defined in this Companion Specification
Conformance Units
GMS GMSIdentificationType

11.3 CylindricalWorkspaceType

This structure contains the information of a Cylindrical Workspace. The structure is defined in Table 46

Table 46 – CylindricalWorkspaceType Structure

Name	Type	Description
CylindricalWorkspaceType	structure	Subtype of WorkspaceType defined in this Companion Specification
Length	0:Double	in direction of global gravity
Radius	0:Double	An orthogonal direction to height and length

Its representation in the AddressSpace is defined in Table 47

Table 47 – CylindricalWorkspaceType Definition

Attribute		Value
BrowseName		CylindricalWorkspaceType
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the WorkspaceType defined in this Companion Specification
Conformance Units
GMS GMSIdentificationType

11.4 MeasurementReasonEnum

This enumeration MeasurementReasonEnum indicates the reason of a measurement. The enumeration is defined in Table 48.

Table 48 – MeasurementReasonEnum Items

Name	Value	Description
ContinuousMeasurements	0	Series measurement. Default inspection
SpecialMeasurement	1	Other kind of measurements apart from series production
AuditMeasurement	2	capability and audit inspections
MinMastering	3	Zeroing / sensitivity check with Min Master
MedMastering	4	Zeroing / calibration
MaxMastering	5	Zeroing / sensitivity check with Max Master

The MeasurementReasonEnum representation in the AddressSpace is defined in Table 49.

Table 49 – MeasurementReasonEnum Definition

Attribute		Value
BrowseName		MeasurementReasonEnum
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the Enumeration type defined in OPC 10000-5
0:HasProperty	Variable		0:EnumStrings	0:LocalizedText []	0:PropertyType
Conformance Units
GMS GMSJobType

11.5 ToleranceLimitEnum

This enumeration defines the kind of a tolerance limit. The enumeration is defined in Table 50.

Table 50 – ToleranceLimitEnum Items

Name	Value	Description
NoLimit	0	There is no tolerance limit.
LimitValue	1	The limit is a predefined limit.
NaturalLimit	2	The limit is defined for technological or physical reasons.

Its representation in the AddressSpace is defined in Table 51.

Table 51 – ToleranceLimitEnum Definition

Attribute		Value
BrowseName		ToleranceLimitEnum
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the Enumeration type defined in OPC 10000-5
0:HasProperty	Variable		0:EnumStrings	0:LocalizedText []	0:PropertyType
Conformance Units
GMS CharacteristicType

11.6 ToolAlignmentState

This enumeration defines the alignment of a tool. The enumeration is defined in Table 52.

Table 52 – ToolAlignmentState Items

Name	Value	Description
Fixed	0	Means the tool is fixed.
Indexed	1	Means the tool can be moved in steps.
Continuous	2	Means the tool can be moved Continuous.

Its representation in the AddressSpace is defined in Table 53.

Table 53 – ToolAlignmentState Definition

Attribute		Value
BrowseName		ToolAlignmentState
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the Enumeration type defined in OPC 10000-5
0:HasProperty	Variable		0:EnumStrings	0:LocalizedText []	0:PropertyType
Conformance Units
GMS SensorType

11.7 ToolIsQualifiedStatus

This enumeration defines qualified status of a tool. The enumeration is defined in Table 54.

Table 54 – ToolIsQualifiedStatus Items

Name	Value	Description
Qualified	0	The tool is qualified.
Imprecise	1	Means the tool can be moved in steps.
NotQualified	2	The tool is not qualified.

Its representation in the AddressSpace is defined in Table 55.

Table 55 – ToolIsQualifiedStatus Definition

Attribute		Value
BrowseName		ToolIsQualifiedStatus
IsAbstract		False
References	NodeClass		BrowseName	DataType	TypeDefinition	Other
Subtype of the Enumeration type defined in OPC 10000-5
0:HasProperty	Variable		0:EnumStrings	0:LocalizedText []	0:PropertyType
Conformance Units
GMS SensorType