## 5.8.15 GetGroupMemberships Method

The GetGroupMemberships Method is used to find the list of AlarmGroups that this alarm is in.

Signature

GetGroupMemberships(

[out] NodeId[] Group
);


Method result codes in Table 69 (defined in Call Service)

Table 69 – GetGroupMemberships result codes

Result Code Description
Bad_MethodInvalid The MethodId provided does not correspond to the ObjectId provided. See 10000-4 for the general description of this result code.
Bad_NodeIdInvalid    Used to indicate that the specified ObjectId is not valid or that the Method was called on the AlarmConditionType Node.See 10000-4 for the general description of this result code.

The GetGroupMemberships Method applies to an Alarm instance, even if it is not currently in the Active State.

Table 70 specifies the AddressSpace representation for the GetGroupMemberships Method.

Table 70 – GetGroupMemberships Method AddressSpace definition

Attribute Value
BrowseName GetGroupMemberships
References NodeClass BrowseName DataType TypeDefinition ModellingRule
HasProperty Variable OutputArguments Argument[] PropertyType Mandatory

ConformanceUnits
A & C GetGroupMemberships